Finding your suitable readers for 1/2 x 1/2 x 1/4 tee is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for 1/2 x 1/2 x 1/4 tee including detail information and customer reviews. Let’s find out which is your favorite one.
936 reviews analysed
1. SharkBite 24983A Service Tee Stop Valve, 1/2 inch x 1/2 inch x 1/4 inch, Quarter Turn, Compression Service Stop Fitting, Water Valve Shut Off, Push-to-Connect, PEX, Copper, CPVC, PE-RT
Feature
- INSTALLS IN SECONDS: 1/2″ x 1/2” x 1/4″ threaded compression tee shut off valve requires no special tools, no soldering, no crimping or glue. Just push to create a watertight seal
- PERFORMANCE: Rated to 200 psi and 200 Degree F. Use in Potable water and Hydronic Heating applications
- COPPER, PEX, CPVC, PE-RT: SharkBite hose connector inlet fits Copper, PEX, CPVC and PE-RT Pipe and connects them in any combination
- QUALITY: Only SharkBite’s quality and performance is field-proven with more than 550 million connections. SharkBite is the only push-to-connect brand that can ensure a clean, leak-free connection
- RESIDENTIAL and COMMERCIAL: All SharkBite fittings meet the same standards for commercial and residential plumbing applications
Description
CUT. PUSH. DONE.
The SharkBite Connection System makes any plumbing project fast and easy with our unique push-to-connect technology. When you insert a pipe into the SharkBite quick connect fittings, the stainless steel teeth bite down and grip the pipe, while the specially formulated O-ring compresses to create the perfect watertight seal.
We use high quality DZR Lead Free Brass for our 1/2” x 1/2” x 1/4” 1/4 Turn Tee Stop Valve. Chrome plated valve for an attractive appearance. This SharkBite Tee Stop allows you to easily and effortlessly tap into a current or new plumbing line and run a 1/4” compression line out to an end fixture. Makes it easy to add a humidifier, dishwasher, ice maker, faucet installation or toilet installation to a new or existing line. Alternatively, can be used as a saddle valve.
Our product works with your existing plumbing, is easy to disassemble for changing fittings, and can be rotated for easier installation in tight spaces. SharkBite push connect fittings are the no fuss way to fix small leaks or plumb a whole house. Whether you need to repair a broken pipe or plumb a whole house, SharkBite fittings are the push-to-connect solution for leak-free results.
SHARKBITE
SharkBite is a provider of plumbing and water control systems for domestic, commercial and industrial applications. As the world leader and hallmark of push-to-connect plumbing solutions, our goal is to continue innovating the plumbing trade with new solutions that improve efficiency and performance. Trusted by plumbing professionals, SharkBite manufactures a wide range of plumbing fittings, water control valves and PEX pipe, making it the only total plumbing solution from meter to fixture.
2. SharkBite U359LFA 1/2-Inch by 1/2-Inch by 1/4-Inch Reducing Tee Retail Packaging
Feature
- The SharkBite Connection System is an instant push-fit connection that connects copper tubing, CTS CPVC and PEX pipe in any combination
- No soldering, clamps, unions or glue required
- Certified to 200 PSI and 200-DegreeF
- Compact, robust DZR brass body is the foundation of a strong, corrosion resistant, durable fitting
- The SharkBite Connection System is an instant push-fit connection that connects copper tubing, CTS CPVC and PEX pipe in any combination
- Certified to 200 PSI and 200-DegreeF
- Compact, robust DZR brass body is the foundation of a strong, corrosion resistant, durable fitting
Description
Product Description
The SharkBite push-fit fittings are the fastest, easiest way to join copper, CPVC, or PEX tubing in any combination. Each fitting increases ease of use while decreasing the time and effort needed to connect water distribution pipe. There is no glue, soldering or crimping needed. Simply cut your pipe, debar, mark the pipe approximately 1 (for proper insertion depth), install pipe to proper depth and you’re done.
From the Manufacturer
The SharkBite push-fit fittings are the fastest, easiest way to join copper, CPVC, or PEX tubing in any combination. Each fitting increases ease of use while decreasing the time and effort needed to connect water distribution pipe. There is no glue, soldering or crimping needed. Simply cut your pipe, debar, mark the pipe approximately 1 (for proper insertion depth), install pipe to proper depth and you’re done.
3. WATTS P-667 Ice Maker Tee Valve, 1/2-Inch Cts x 1/4-Inch Od
Feature
- 1/2 Cts x 1/2 Cts x 1/4 O.D. Quick connect tee valve for use with 1/2″ Copper, PEX, CPVC, polybutylene and 1/4″ O.D. Pex, polyethylene or copper Supply lines for ice makers and water connections
- Made from high quality materials and highly durable
- Manufactured in China
- Watts quick connect products are the easiest method on the market for joining copper, CPVC, and PEX (LDPE, MDPE, HDPE) tubing
- Plastic quick connect TEE with 1/2-Inch CTS on two sides with 1/4-Inch OD ball valve on third side
- Perfect for DIY pipe repair
- Approvals include FDA, ANSI/NSF-61, NSF-14, CSA B1375, ASTM F877, NSF-UP, and IAPMO ASSE 1061-2006
- Rated for 250psi at 75 degrees F and 100psi at 180 degrees F
Description
Product Description
1/2 CTS x 1/2 CTS x 1/4 O.D. quick connect tee valve for use with 1/2” copper, PEX, CPVC, and 1/4” O.D. PEX, polyethylene or copper supply lines for ice makers and water connections in refrigerators.
From the Manufacturer
This fitting incorporates stainless steel gripping teeth in the collets. These corrosion resistant teeth allow the connectors to interconnect with multiple materials without the need for special tools. It works with copper, CPVC, and PEX (LDPE, MDPE, HDPE) tubing.
4. Frizzlife 1/2" and 3/8" Brass Feed Water Adapter – 3/8" Comp with 1/2" Converter Fitting and 1/4 inch OD Compression Angle Stop Valve Adapter for Reverse Osmosis Water Filters, Coffee Brewers
Feature
- ALL BRASS MATERIAL
- Fits both 3/8″ OD angle valve(9/16-24UNEF) and 1/2″ OD angle valve.
- ✔TEE UNION ADAPTER: 3/8” male and female compression fittings x 1/4″ tube quick connect, and two 1/2″ NPT converter fittings.
- ✔TWO EXTRA CONVERTER FITTINGS: Fitting A : 1/2″ male NPT and 3/8″ female NPT threaded connections
- Fitting B: 3/8″ male NPT and1/2″ female NPT threaded connections.Allows to connect both 1/2″ and 3/8″ water supply.
- ✔ROUGH BRASS CONSTRUCTION: Full copper material to prevent leakage, strong and long lasting life time
- ✔LEAD FREE PRODUCT & INSTALLS IN SECOND: extremely easy to load and unload.
- ✔APPLICATIONS: Adapt to most home kitchen feed water supply with 1/2″ or 3/8″ to Water filters, Reverse Osmosis water system, ice maker, etc.
Description
Frizzlife feed water valve. White polypropylene with food grade EPDM o-rings, connects between valve and riser to the main water supply line for application in reverse osmosis, filtration systems, automatic coffee brewers, and ice-makers. Not for use with compressed air, explosive gases, petroleum spirits and other fuels, or for heating systems. Sizes indicated are thread male compression x thread female compression x tube OD. Including: TEE UNION ADAPTER: Size: 3/8″ Thread male x 3/8″ thread female x 1/4″ tube quick connect with compression. Fitting A : 1/2″ male NPT and 3/8″ female NPT threaded connections Fitting B: 3/8″ male NPT and1/2″ female NPT threaded connections If your water angle valve is 1/2″ OD, use both TEE union adapter and two fittings to connect the angle valve and water hose. If your water angle valve is 3/8″ OD, only use the Tee union adapter to connect the angle valve and water hose. Water Systems feed water angle stop valve adapter has 3/8” male and female compression and two NPT thread 3/8″ to 1/2″ converter fitting for easy installation on most under-sink cold water supply and faucet water lines. The ¼” Tube OD quick connect fitting allows for easy connection to reverse osmosis systems water filter, ice makers and other potable water applications.
5. Dual Compression Outlet Angle Stop Valve, Plumbing Fitting, Quarter Turn, Single Handle Multi-Select Positions, Water Valve Shut Off 1/2 inch x (3/8 inch x 1/4 inch)
Feature
- 1/2″ copper inlet x 3/8” OD outlet x 1/4” OD Outlet. Great for splitting 1 to 2 outlets to ice maker or water filtration system.
- Patented single lever, quarter turn, multi-control on/off position selections.
- Great for residential and commercial applications. For use with cold or hot water feed with water temperatures of 40-140 Degrees Fahrenheit.
- High quality, shiny chrome-plated brass made from lead free compliant material.
- Solid, lead-free, single piece brass construction. Includes all compression rings and nuts.
6. Angle Stop Adapter Valve 1/2" to 1/4" RO Filters Purifiers Feed Water Adapter Ball Valve Diverter Valve for Automatic Coffee Brewers, Ice Makers Etc, Tee union, Brass Sand Chrome
Description
1.Apply to Reverse Osmosis Water System, Automatic Coffee Brewers, Ice Makers and Housing In Line Filters, ETC
2. Easy to load and unload
3.Tee union: G1/2- Female Thread X G1/2- Male Thread X1/4” Barb
4.Ball valve: 1/4 tube quick connect
5.Material: Sand chrome plated brass
Package Included: 1PC Diverter Valve
WARRANTY:Full No Questions 100% Money Back Guarantee!
7. Add-A-Tee 1/2 X 1/2 X 1/4, Lead Free
Description
Plumb Pak water Supply connector tee, 1/2 x 1/2 x 1/4 in nominal, fip x mip x OD end, Rough brass. Plumb Pak water Supply connector tee, 1/2 x 1/2 x 1/4 in nominal, fip x mip x OD end, Rough brass.
8. Cole-Parmer Male reducing tees 1/2 x 1/4" Pack of 10
9. Eaton Weatherhead 1064X8X8X4 Brass CA360 Mini-Barb Brass Fitting, Union Tee, 1/2 x 1/2 x 1/4" Tube OD
Description
Hose fittings connect, control, change the direction of, and terminate the flow in piping and hose systems. They are made of brass, stainless steel, galvanized steel, and other materials that resist corrosion, pressure, and wear. Hose fittings have various types of connections, including threaded, barbed, push-to-connect, dry disconnect, and others including those based on internationally-accepted specifications. Hose fittings are used in systems such as air compressors, automatic manufacturing operations, aircraft controls, and tire installation in industries including agriculture, mining, road construction, firefighting, and aviation.
Eaton manufactures electrical, hydraulic, and mechanical power equipment. The company, founded in 1911, is headquartered in Dublin, Ireland.
Conclusion
By our suggestions above, we hope that you can found 12 X 12 X 14 Tee for you.Please don’t forget to share your experience by comment in this post. Thank you!
