Top 10 220 Volt Power Tools

Product Description

The Bosch 1375A 4-1/2 in. Angle Grinder features a powerful 6.0-Amp motor that produces 11, 000 no-load RPM, making this compact Grinder a powerhouse tool. It was designed for concrete contractors, vehicle fabricators and other professionals who need a compact Grinder. With a well-designed grip, lock-on slide switch, two-position side handle and 11, 000 no-load RPM, This workhorse can get the job done. It is well suited for metal fabrication, concrete restoration, pipe fitting and more. It uses service Minder brushes that stops the Grinder when preventative maintenance is required and epoxy-coated field windings, for longer tool life. The lock-on slide switch, two-position side handle and 3.75 lbs. Weight add to user comfort and control.

From the Manufacturer

The Bosch 1375A is a multipurpose tool designed to grind, sand, brush, sharpen, and deburr. This grinder offers a 5/8-inch 11-spindle thread for attaching the most popular accessories. The slim housing grip is designed for easy handling, and the two-position side handle is angled for comfort. The dust-resistant switch and the protected motor deliver longer service life. Save time with the spindle lock for quick wheel changes. Includes guard, side handle, flange kit, wrench, and wheel.

Features

• 6 amps, 11,000 rpm
• Lock-on/off switch for extended use applications
• Sealed switch keeps debris out of the switch mechanism and extends switch life
• ServiceMinder brushes eliminate guesswork, stopping the tool when preventive maintenance is required
• Epoxy-coated field windings provide ultimate protection against abrasive dust and metal debris
• 5/8-inch-11 spindle offers wide flexibility for mounting most popular accessories
• Spindle lock for quick wheel changes
• 2-position auxiliary handle is specifically designed and angled to a “natural” position for maximum comfort and control
• Double-insulated, UL-listed, complies to OSHA

Specifications

• Rating: 120 volts AC
• Amps: 6 amps
• Max motor horsepower: 1 hp
• No-load speed: 11,000 rpm
• Wheel diameter: 4-1/2 inches
• Cutoff disc: 4-1/2 inches
• Dry diamond wheel: 4-1/2 inches
• Sanding discs: 4-1/2 inches
• Wire cup brush: 3 inches
• Wire wheel: 4 inches
• Spindle thread: 5/8-inch-11
• Length: 10-1/2 inches
• Weight: 3-3/4 lbs.

Includes

• Guard
• Auxiliary handle
• Flange kit
• Spanner wrench
• Abrasive wheel

Warranty
This Bosch power tool comes with a one-year limited warranty from the date of purchase.

The DEWALT DWE402 4-1/2″ 11-amp Paddle Switch Angle Grinder features the next generation 11 Amp AC/DC 11,000 rpm motor, which provides the best power to weight/size ratio available (1.8HP). It’s Dust Ejection System provides durability by ejecting damaging dust and debris particles that enter the tool. The oversized brushes provide 2X brush life over previous model (D28402) and the large spiral bevel gear provides long transmission life. This grinder offers a One-Touch guard that allows for 360 degree rotation of the guard with a single action. The Quick-Change wheel release allows tool free wheel removal without need for a wrench. It has a top mounted and protected spindle lock button that maximizes the depth of cut without compromising durability. The uniquely small gripping surface in this power class allows for the best comfort available in this class. It also offers a newly designed side handle which provides excellent ergonomics while oversized threading provides durability. Auto-off brushes shut the tool down when the brushes need replacing to avoid tool damage and a paddle switch with safety lock-off prevents accidental start up. Matching wheel flanges allow the use of common accessories. Includes: (1) 2-position side handle, (1) 4-1/2″ One-Touch (T27) Guard.

The Black & Decker BDEG400 4-1/2″ 6 Amp Angle Grinder is ideal for sharpening, cutting, grinding, removing rust and surface preparation. This grinder features a metal gear case for durability and longer life. It offers a 3-position side handle that provides added comfort and control for use with various materials and angles. It also has a spindle lock for easy accessory changes. Operates at 10,000 rpm, with a spindle size range of 5/8″ – 11 “. Includes: (1) 4-1/2” Small angle grinder, (1) Metal grinding wheel, (1) Spanner wrench .

The DEWALT DWE4012 7 Amp 12,000 RPM Paddle Switch Small Angle Grinder features a 7.5 Amp AC/DC, 12,000 rpm motor designed for faster material removal and higher overload protection. The One-Touch Guard allows for a single action to adjust the guard; no buttons or levers, just turn the guard to position it. A hex wrench replaces spanner wrench, which makes it more user friendly as a hex wrench is found in most tool boxes if lost. Its low profile, jam-pot gear case increases durability and allows tool to fit into tight spaces, and the Quick-Change Wheel Release allows tool free wheel removal without need for a wrench. This grinder has a 2-position removable side handle provides increased comfort and control. It also offers a slim, ergonomic body design that provides increased comfort in extended use applications. The 5/8″-11 spindle thread accepts a wide range of 4-1/2″ accessories. Includes: 2-position side handle, Depressed center wheel, One-Touch Guard, Hex Wrench.

The DEWALT DWE4011 eatures a 7.0 amp AC/DC, 12,000 rpm motor, which was designed for faster material removal and higher overload protection. The One-Touch Guard eliminates the need for a tool to adjust the guard location; No buttons or levers, just turn the guard to position it. This unit has a hex wrench which replaces the spanner wrench (a hex wrench is found in most tool boxes if lost). It also features a quick-change wheel release that allows for tool-free wheel removal without need for a wrench. As an added bonus, the two-position removable side handle provides increased comfort and control. To make this tool more versatile, the 5/8-inch-to-11-inch spindle thread accepts a wide range of 4-1/2-inch accessories. You will enjoy working with this slim, ergonomic body design as it provides increased comfort in extended use applications.

The Bosch GWS8-45 4-1/2-inch angle Grinder is a light, ergonomic Grinder, with a slender grip circumference that allows users to work comfortably for extended periods. This 4.2 lbs. Tool delivers plenty of power, with a 7.5-Amp motor that produces 11,000 no-load RPM. It has directed air flow that diverts dust away from vital components. Bosch service Minder brush system shuts off the tool when preventative maintenance is required, which helps to eliminate guesswork. This Grinder has a two-position side handle. It has a burst-protection quick adjustable guard designed for user protection, a fast-change Disc change and a large spindle lock. Includes: (1) auxiliary handle; (1) wheel guard; (1) flange Kit; (1) Spanner wrench; (1) 4-1/2-inch abrasive wheel.

The DEWALT DWE43113 4-1/2″ – 5″ high performance trigger grip Grinder is powered by a 13 amp motor and equipped with the dust Ejection system technology designed to protect the tool from damaging dust and debris that enters through air intake vents. It has a side handle for an alternative grip, along with a 5″ type 27 guard. This Grinder also features a trigger switch with a ‘lock-on’ option the no-load speed at 9000 RPM, with inner and outer flanges. Specs: wheel diameter = 5″, Spindle size = 5/8-11 inches, 1700 max watts out, tool weight = 5.1 lbs. Backed by DEWALT’S 3 year limited warranty. Includes: 1) Grinder, 1) 5″ type 27 guard, 1) side handle, inner and outer flanges.

The Bosch GWS18V-45 18-Volt 4-1/2-Inch Angle Grinder is an ideal portable cordless grinder for electricians, plumbers and others who need professional power. With its four-brush motor design and optimized gear structure, it provides a 0-10,000 no-load rpm, to handle cutting and grinding applications. It features a two-position Vibration Control side handle for better handling and less operator fatigue. It is designed for long tool life, with Bosch’s Electronic Cell Protection and Electronic Motor Protection, optimized brush design. For user protection, this cordless grinder was engineered with a tool-less quick-change, burst-resistant wheel guard and restart protection to avoid accidental startup.

The Metabo HPT G12SR4 4 1/2″ Angle Grinder removes casting fin, finishes various types of steel, bronze and aluminum materials and castings, grinds Welded sections, sections cut by means of an Acetylene torch, synthetic resins, slate, brick and Marble. With it’s small grip diameter, high output power and overload durability, It delivers great performance. This grinder comes with 5 grinding wheels and a carrying case.