Top 8 3M 5000 Series Half Mask Ov Kit L

3M – Half Facepiece 6000 Series, Reusable – Size: Large

The 3M Half Face piece Reusable Respirator 6000 Series helps provide protection against particulates and a wide variety of gases and vapors when used with approved cartridges and filters. When properly fitted and used with approved 3M cartridges and filters, this respirator helps provide protection at concentrations up to 10 times the Permissible Exposure Limit (PEL). The swept back design of the cartridges helps improve balance and visibility. Remarkably comfortable, soft, lightweight face piece has easy-to-adjust head straps allow for a customized fit to the user. Replaceable cartridges help reduce waste and costs over time. NIOSH, a Federal government regulatory agency, has tested and approved the 6000 Series Half Face piece with 3M cartridges, filters or supplied air systems. The 6000 Series is NIOSH approved for negative-pressure air purifying and positive-pressure dual airline applications. This half face piece respirator may be used with 3M Cartridge 6000 Series; 3M Filters 2000, 2200, 7000 or 5000 Series; or 3M Dual Airline Systems against a variety of gases, vapors, and particulate hazards according to NIOSH approvals. Breathing hazardous particles, gases and vapors can be harmful to your health. The 3M Half Face piece Reusable Respirator 6000 Series helps reduce exposure to many contaminants.

High Performance Heat and Cut Resistant Oven Safety Gloves
Outer layer of glove does not catch fire & does not melt when exposed to an open flame.
Thick but light weight material allows your hands to move with more flexibility while protecting your hands from high temperature objects.
Food grade non-slippery silicon design keep your kitchen work safer.
Threshold time: 8 s of 932°F(500℃), 15s of 500°F(260℃)

Usage
BBQ, grilling, baking, oven work, smoking, changing light bulbs, carrying logs for fireplace, handling super hot items in the kitchen and outdoors, Car Repair, Welding, and much more.

Warm Tip
Never use them to move or serrate blades or other powerful tools.
Gloves does not protect against heat from hot liquids.
Avoid gloves to be soaked wet.
Replace them if damaged or frayed.
Always Drip-Dry. Do not bleach, machine-dry or Iron

The 3M Half Facepiece Reusable Respirator 6000 Series helps provide protection against particulates and a wide variety of gases and vapors when used with approved cartridges and filters. When properly fitted and used with approved 3M cartridges and filters, this respirator helps provide protection at concentrations up to 10 times the Permissible Exposure Limit (PEL). The swept back design of the cartridges helps improve balance and visibility. Remarkably comfortable, soft, lightweight facepiece has easy-to-adjust head straps allow for a customized fit to the user. Replaceable cartridges help reduce waste and costs over time. NIOSH, a Federal government regulatory agency, has tested and approved the 6000 Series Half Facepiece with 3M cartridges, filters or supplied air systems. The 6000 Series is NIOSH approved for negative-pressure air purifying and positive-pressure dual airline applications. This half facepiece respirator may be used with 3M Cartridge 6000 Series; 3M Filters 2000, 2200, 7000 or 5000 Series; or 3M Dual Airline Systems against a variety of gases, vapors, and particulate hazards according to NIOSH approvals. Breathing hazardous particles, gases and vapors can be harmful to your health. The 3M Half Facepiece Reusable Respirator 6000 Series helps reduce exposure to many contaminants.

Single Stud w/ Stainless Steel “O” ring – 4,000 lb.* capacity rating.

This fitting fits all aluminum tracking similar to the track in the image above. Single stud refers to the number of “fingers” that it captures when attached.

The fittings’ aluminum base will not rust. It is SPRING LOADED to permit simple attach and detach operation. To detach, simply pull up on the spring loaded mechanism and then slide forward or back and the fitting releases. To attach, rest the fitting in the load track, then push down on the base and push forward. The single stud fitting attaches to one set of “fingers” in the load track. For a stronger and more secure fitting consider triple or double stud fitting.

IT IS NOT recommended to pull at an angle greater than 45 degrees. As a rule of thumb you lose about half your rating at a 45 degree angle.

*RATED CAPACITY: Also known as assembly capacity or break strength is the minimum load a complete assembly can withstand before failure in a laboratory pull test when the product is new. WLL The maximum load weight a tie-down should be subjected to during normal use. To assist in making the proper tie-down choice the Federal D.O.T. requires the W.L.L. to be 1/3 of the Rated Capacity.