The Best 3M 9705

A manual applicator gun designed for use with 3M’s 1:1 50mL and 2:1 37.5mL cartridges

The #3 UniBit Step Drill has 9 holes from 1/4″ to 3/4″ hole sizes with increments of 1/16″; shank size is 3/8″. Each UniBit step drill has an easy-to-sharpen, non-skid tip which eliminates skidding and the need for center punching; the tip gives sure starts even on curved surfaces. The single-fluted cutting edge that you will find on the UniBit step drills helps assure true round holes and allows greater control. They are constructed of industrial grade high speed steel and heat treated to assure maximum durability. The UniBit step drill has 3 flatted shanks, which prevents slipping in drill chuck. The multiple steps on each UniBit eliminates the need to maintain a toolbox full of specific size drill bits. WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

ACDelco GM Original Equipment Ambient Air Temperature Sensors are used with automatic climate control systems. The sensors provide the HVAC system controller with outside air temperature, allowing the controller to modify the climate-control strategy. The sensors may also provide the signal for the outside temperature in the driver information display. This original equipment ambient air temperature sensor is a GM-recommended replacement for your vehicle’s original components and has been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Easily store food while minimizing clutter around your kitchen using Rubbermaid Food Storage Containers with Easy Find Lids. Featuring a new built-in vent for splatter-resistant microwaving, these meal prep containers are easy to organize and help conserve space in your cabinets. The lids snap to each other and to the bottom of the containers and have a bright red color, helping ensure that they are always easy to find. Constructed from durable, BPA-free plastic, these food containers are built to withstand a wide range of temperatures and are dishwasher, microwave, and freezer safe. Thanks to their clear bases, it’s easy to see the contents of any container.

Audio Control LC2i 2-channel line output converter for adding amps to your factory system

There Is No Substitute for the Sound of PDR

Welcome the new digital PDR-Power series of Class-D amplifiers. The PDR-Power amplifiers incorporate many of Alpine’s best in class digital technologies, high performance and signature sound.

Overview
Class-D Performance
PDX Technology Inside
Rotatable Illuminated Alpine Badge
Top-Side Control Panel
Voltage ON/OFF Sensing for OEM Upgrade
Built-in Crossover & Bass EQ
Remote Bass (RUX-KNOB) Compatible
Sound Quality

CEA-2006 Power Ratings
CEA-2006 Power Rating: 75W RMS x 4 + 250W RMS x 1 (4-ohm, 14.4V at Less Than 1% THD+N)
RMS Power Ratings
Per channel into 4 Ohms: 75W RMS x 4 + 250W RMS x 1 (14.4V at Less Than 1% THD+N)
Per channel into 2 Ohms: 100W RMS x 4 + 350W RMS x 1 (14.4V at Less Than 1% THD+N)
Bridged 4 Ohms: 200W RMS x 2 (CH-1/2/3/4, 14.4V at Less Than 1% THD+N)
Sound Tuning
Crossover Frequency (CH1/2/3/4, HPF): 50 Hz – 400 Hz, -12 dB/oct.
Crossover Frequency (Subwoofer, LPF): 50 Hz – 400 Hz, -24 dB/oct.
Subsonic Filter (Subwoofer): 8 Hz -40 Hz, -24dB/oct. (Variable)
BASS EQ (Subwoofer): 0 to +12 dB, fc=50Hz (Variable)
Dimensions
Foot Print (WxHxD) mm: 270 x 50.8 x 165 mm
Foot Print (WxHxD) in: 10-3/4″ x 2″ x 6-1/2″
General
Power Requirements: 14.4 V.DC (11-16V allowable)
Input Impedance: >10k ohms
Frequency Response (+0, -3dB: 1W into 4 Ohms) for CH-1/2/3/4: 8 Hz – 45k Hz
Frequency Response (+0, -3dB: 1W into 4 Ohms) for Subwoofer: 8 Hz – 400 Hz
THD+N (10W into 4 Ohms) for CH-1/2/3/4: 0.02 %
THD+N (10W into 4 Ohms) for Subwoofer: 0.02 %
Damping Factor for CH-1/2/3/4: >500
Damping Factor for Subwoofer: >1000
Signal to Noise (Rated Power into 4 Ohms) for CH-1/2/3/4: 105 dB
Signal to Noise (Rated Power into 4 Ohms) for Subwoofer: 110 dB
Weight: 2.76 kg/6lb 1.4oz
Input Sensitivity (RCA Input,CH-1/2/3/4): 0.2 – 4.0 V
Input Sensitivity (RCA Input, Subwoofer): 0.1 – 4.0 V

The ScanGauge D is specifically designed for Diesel Pusher RVs, over the road long-haul trucks and other large diesel vehicles. The ScanGaugeD features more than 15 built-in digital gauges, 5 sets of trip data, the Performance Monitor as well as the exclusive X-Gauge programmable gauge system. With X-Gauge on your diesel pusher, you can monitor parameters such as EGT (Exhaust Gas Temp), Transmission Oil Temp, Engine Oil Temp and much more.

HyperX Predator DDR4 memory has a fierce new heat spreader design in black aluminum for greater heat dissipation to optimize reliability. The heat spreader and PCB complement the look and design of the latest PC hardware, so you can dominate in HyperX style. Predator DDR4 delivers blazing fast speeds matched with low latencies for extreme DDR4 performance, ultra-response multitasking and an overall faster system. It complements Intel’s 6 and 8 core processors for faster video editing, 3D rendering and AI processing – and to keep you in the lead while gaming. Predator DDR4’s Intel XMP-ready profiles are optimized for Intel’s 100 Series chipset, X99 motherboards and Intel Core i7 HEDT processors for compatibility and the highest performance. XMP profiles are hand-tuned so end users can easily overclock their platforms for higher-performing frequencies and lower timings by simply selecting a profile, with no need for manual timing adjustments in BIOS. HyperX Predator DDR4 keeps its cool even in a deathmatch and takes full advantage of the power efficiency brought by DDR4 for lower power consumption over DDR3. Less power draw results in less heat and higher reliability. HyperX Predator DDR4 is 100-percent factory tested at speed and backed by free technical support and legendary reliability.