The Best Dewalt Cordless Table Saw Review

Maximized for accuracy and capacity this DEWALT DWE7485 8-1/4 in. table saw includes on-board storage for blade guard assembly, non-through cut riving knife, anti-kickback pawls, blade change wrenches, miter gauge and push stick. The powerful DEWALT 15 amp, 5800 RPM motor allows users to complete a majority of applications. The rack & pinion fence allow for fast, easy adjustments and provides the capacity to rip 4×8 sheet goods.

The DEWALT DW7451 compact table saw stand delivers the best of both worlds: solid construction for a safe work environment and a compact, folding design for easy transport and storage. Heavy-duty tube steel construction provides the strength you need for safe operation. Integrated support bar hardware holes for secure fastening of saw to the stand. This stand is lightweight; it folds flat for easy handling, storage, and transport. Designed for use with the DW7480 compact job site table saw, Dcs7485 60V table saw and DW745 compact table saw. Backed by a 3-Year limited warranty.

The DEWALT DWS779 12″ Sliding compound Miter saw features a powerful 15 amp, 3, 800 RPM motor that delivers extended power and durability. It has a super efficient dust collection system that captures over 75% of dust generated. This miter saw also offers an exclusive back fence design which cuts up to 2×16 dimensional lumber at 90° and 2×12 at 45°.

The DEWALT DWE74911 Rolling Table Saw Stand is designed for easy setup and break down with excellent stability. This stand is lightweight for enhanced mobility and portability. It features durable steel construction, and is designed for easy loading and unloading into and out of vehicle. Can be used with DWE7490X, DWE7491RS, DWE7499GD, DWE7480 and DW745.

Product Description

Variable speed control with soft starting motor features full time electronic feedback that maintains motor speed through the cut. Dual LED’s and clear sub base ensure maximum visibility, adjustment ring enables controlled bit depth changes, large, low-pressure spindle lock button, multiple shaft lock detents, depth ring, clamping mechanism and spring loaded release tabs. Specs: 7.0 amps, 16,000-27,000 RPM no load speed, 1/4" collet diameter, 1.5" plunge stroke, 4" base dimension, 12 position spindle lock, weighs 4.1 lbs. Includes: motor, standard base, wrench and instruction manual.Plunge base incorporates fine-tune adjustment rod for precise depth setting.

Amazon.com

Combining power, ease-of-use, ergonomic features and innovations designed for visibility, control and overall performance, the DEWALT DWP611 compact router can handle a variety of applications–from small bevel cuts to large edge profiles and heavy flush trimming. In addition to its beefy 1-1/4 horsepower motor, the DWP611 is equipped with dual LED lights for ample illumination. This package comes with a fixed base, but it’s also available as a kit with both fixed and plunge bases.

The DWP611 with fixed base (view larger).

Dual LED’s and clear sub-base ensure maximum visibility (view larger).

Power and Performance

The DWP611 compact router features a 1-1/4 peak HP motor that delivers significantly more power than competitors’ models to help you be as productive as possible. The variable speed control helps you to better manage the tool and determine the speed that is best suited for the application at hand. A low, contoured grip that is close to the work surface also contributes to an excellent level of control–providing both precision and productivity on the job site. The soft starting motor features full time electronic feedback that maintains motor speed through the cut. An adjustment ring enables controlled bit depth changes to within 1/64-inch.

Comfort and Convenience

The fixed base’s dual LEDs and clear sub-base ensure maximum visibility in operation. The extended 1/4-inch router collet provides greater bit contact with the bit shaft than traditional routers, allowing you a firm grip on the bit and less vibration. The D-shaped sub-base provides stability and flatness when running edge profiles, and the spindle lock has been designed to greatly improve the ease of bit change by incorporating a large button that can be actuated with the same hand that stabilizes the router.

The router also features two tabs that allow for a quick and simple base release, and a new base/adjustable clamp design so the motor location is maintained through the toughest applications.

Warranty

This DEWALT tool is backed by three-year limited warranty covering any defects due to faulty materials or workmanship (from the date of purchase).

DeWALT DCS335B 20-Volt 1-Inch Brushless Palm Handle Jig Saw – Bare Tool

The DEWALT DCS374B 20v Max XR Deep Cut Band Saw features a 5” cut capacity to cut strut, pipe, angle iron, pipe and various other materials. Cuts up to 4″ SCH 40 pipe and double strut. This band saw has an LED Work Light with a 20 second delay that illuminates dark work surfaces for accurate cutting, and offers variable speed trigger and dial allow for versatility and control. The DEWALT Deep Cut Band Saw is capable of up to 149 cuts of 1-5/8″ Strut with 14 TPI blade. There is an integrated hang hook which allows user to hang the saw without damaging the front handle or base, and the tool-less blade changing lever loosens blade tension for easy blade changes. This is a bare tool item – battery sold separately.

The DEWALT DCS391P1 20V MAX Lithium Ion Circular Saw Kit features a powerful 5250 rpm motor that delivers power and speed to make the most demanding cuts with ease. A high strength and lightweight magnesium shoe provides jobsite durability for long-term cut accuracy, and the optimized rubber overmolded comfort grip delivers optimal balance and control. 0Degree-50Degree bevel capacity allows for aggressive bevel cuts for a multitude of applications, along with a 6-1/2″ carbide tipped blade for cutting 2x material at 90Degree and 45Degree and more cuts per charge. This saw is powered by a 20V MAX Lithium Ion 5.0 AH battery. No Load Speed: 5250 rpm, Depth of Cut at 45Degree: 1-5/8″, Depth of Cut at 90Degree: 2-/4″. Kit includes: (1) DCS391 6-1/2″ Circular Saw, (1) DCB205: 20V MAX XR Premium Li-Ion Battery (5.0 Ah), Fast Charger, 6-1/2″ Carbide-tipped Blade, and Kit Box.

The DEWALT DCS371M1 20V MAX lithium-ion band saw (bare tool) features a 2-1/2″ cut capacity, and the ability to cut up to 2″ SCH 40 pipe. The centered handle position provides superior balance and ergonomics and allows for more accurate cuts and less user fatigue. A LED Work Light with 20 second delay illuminates dark work surfaces for accurate cutting. This unit has an integrated hang hook which allows users to hang the saw without damaging the front handle or base. The special blade tracking adjustment increases blade life by providing better blade tracking, and the tool less blade changing lever loosens blade tension to allow for easy blade changes. The dual bearing blade guide rollers provide increased durability in the blade support system. This band saw also has an ergonomic soft grip back handle which provides the user with comfort and flexibility.

Common applications include: conduit up to 2″ dia., 1-5/8″ Unistrut, SCH 40 pipe up to 2″, threaded rod, square and rectangular tubing, and angle iron.

Max capacity round: 2-1/2″
Max capacity square: 2-1/2″
Blade length: 32-7/8″
Cutting speed: 570 fmp

This kit includes:
(1) DCS371 20V MAX band saw
(1) 14/18 TPI blade
(1) blade tracking wrench
This is a bare-tool item; battery and charger sold separately.