The Best Whirlpool Duet Washer Noise When Spinning

INSTALLATION INSTRUCTIONS: 1) Level the WASHER by rotating front feet with an adjustable wrench to raise/lower. Use a level on top of WASHER until it is completely level, both front-to-back and side-to-side. 2) Clean the top of the WASHER with an all-purpose cleaner, then ensure it is completely dry. 3) Remove the leveling feet from the bottom of the DRYER with an adjustable wrench. 4) Clean the bottom of the DRYER with an all-purpose cleaner, then ensure it is completely dry. 5) Peel protective paper from the adhesive side of one of the foam strips provided. Stick the foam strip along the bottom edge of the DRYER covering small ribs along the bottom edge of the cabinet. Repeat on each edge of the bottom of the DRYER (all four bottom directions). NOTE: Foam strips should not stick out past the edge of DRYER cabinet. 6) With an assistant, lift DRYER on top of WASHER. Line up back of DRYER with back of WASHER. 7) Locate the two horizontal slots in back of DRYER cabinet (directly above stacking bracket screw holes in back of WASHER cabinet). Insert curved end of the metal stacking bracket into horizontal slots on back of DRYER. Attach brackets to the back of the WASHER with provided screws This is a generic product manufactured and distributed by Impresa Products (TM). This is not a Whirlpool (R), Kenmore (R), Sears (R), Maytag (R) or KitchenAid (R) OEM product and Impresa Products has no affiliation with or endorsement from these manufacturers. Our product is not covered under any Whirlpool (R), Kenmore (R), Sears (R), Maytag (R) or KitchenAid (R) manufacturer’s warranty. The afforementioned brand names and logos are the registered trademarks of their owners. Any use of the afforementioned brand name, model or any other related designations are made solely for purposes of describing and illustrating compatibility.

Is your washer or dryer wobbly, squeaky, or prone to “walk/skid” away from its spot when in use? STEADY-PAD Anti-Vibration/Anti-Walk pads are the most effective solution available. These pads have been designed with premium heavy-duty rubber to fit ALL MODELS of washers and dryers on the market. STEADY-PAD is the key to keeping your washer and dryer anchored to your floor WITHOUT using adhesive. The pads stay put on your floor thanks to the unique micro-grip pattern molded on the underside of each pad. In addition to increased stability, the unique molded bottom and thick shock absorbing rubber provide the ideal buffer to eliminate excess vibration and sound. In each package, you’ll receive 4 STEADY-PAD Anti-Vibration/Anti-Walk Pads and a User Guide. Each pad is 3 inches in diameter and 1.25 inches in thickness. The top of the pad features a 1.75 inch indentation to securely fit the leg on each corner of the machine. We confidently stand by our products with a 120-day money-back guarantee. Enjoy!

Is your washer or dryer wobbly, squeaky, or prone to “walk/skid” away from its spot when in use?

ATETION Anti-Vibration/Anti-Walk pads are the most effective solution available.

These pads have been designed with premium heavy-duty rubber to fit ALL MODELS of washers and dryers on the market.

ATETION is the key to keeping your washer and dryer anchored to your floor WITHOUT using adhesive. The pads stay put on your floor thanks to the unique micro-grip pattern molded on the underside of each pad.

In addition to increased stability, the unique molded bottom and thick shock absorbing rubber provide the ideal buffer to eliminate excess vibration and sound.

In each package, you’ll receive 4 ATETION Anti-Vibration/Anti-Walk Pads and a User Guide. Each pad is 3 inches in diameter and 1.25 inches in thickness. The top of the pad features a 1.75 inch indentation to securely fit the leg on each corner of the machine.

We confidently stand by our products with a 120-day money-back guarantee. Enjoy!

Genuine VIBRAFIX pads are one of the best washing machine anti-vibration solutions on the market. You will not be disappointed! If this product does not fix or reduce the vibration issue just return it for a full refund. This product is made out of quality rubber blend that has very good vibration absorbing abilities and among the highest coefficient of friction in the rubber family. This will prevent any “walking” or skidding of your washer.* If “walking” of washer is your main problem we highly recommended purchasing the Super Anchor Liner Discs that will keep the VIBRAFIX pads and your appliances locked in place for good. To purchase Anchor Discs click on ENJ Products, LLC. VIBRAFIX pads are 3 inches in diameter and 1 inch thick. They are black in color and come in set of four. In the middle they have indentation for machine feet. This indentation is universal in size and will work with most size and brands. The pads will also absorb any dryer vibration, so DON’T FORGET to buy an additional set of VIBRAFIX pads for your drier to keep your appliances at the same height.* NOTE: PLEASE FOLLOW INSTALLATION INSTRUCTIONS INCLUDING WASHER LEVELING AFTER THE PADS ARE INSTALLED (i.e. checking each washer foot when in spin cycle and lowering until movement is minimized)! *- Results and performance will vary and depend on your situation i.e. type of flooring, size and balance of the load, machine level, etc. –Please check our reviews–

Genuine Original Equipment Manufacturer (OEM) parts! This door boot (part number WP8182119) is for washers. Door boot WP8182119 forms a seal between the wash tub and the door, preventing leaks. Unplug the washer before installing this part. Wear work gloves to protect your hands. For Kenmore Elite, Whirlpool, Maytag, Kitchenaid, Amana, & Kenmore.