Top 5 Used Car Dealers In Fulton Ny

Bulldog Powered Drive A-Frame Tongue Jack, featuring Exclusive Spring-Loaded Drop Leg Pin. Rating of 4,000 lbs., 22″ of total travel – 14″ screw travel and 8″ drop leg travel. Extended length of 34.50″, and 24″ clearance. Deploys and hooks up easily at night with 3 onboard LED courtesy lights to fully illuminate coupler area. Works in case of power loss with emergency manual override capability, easily accessible from the top. Lasts for years with industry-leading BULLDOG performance, known worldwide for unmatched strength, durability, and side load capacity. Retains like-new appearance with corrosion-resistant surfaces. Color coordinating black case cover. Also available with white case cover see Bulldog #500199. Limited 5-year warranty.

All vehicle specific brake control wiring harnesses are available in 1-Plug or 2-Plug styles. 1-Plug units are designed for brake controls manufactured with electrical wiring mounted on the back of the unit, otherwise known as a pigtail. Wiring harnesses must be spliced into the existing pigtail to allow the vehicle specific plug to be installed. 2-Plug units are designed for brake controls that have a wiring port built into the back of the unit. Simply plug the brake control end of the wiring harness into the back of the brake control and the vehicle end into the automobile’s port. Brake controls that utilize the 2-plug style of wiring harness will be identified with the Plug and Play logo.

Fulton XPD15 0101 Trailer Jack is designed for use with marine and utility trailers. Fulton brand tongue jacks are time-tested and application-proven. Features Z-MAX 600 Superior Plating corrosion protection. Bolt-on, includes all necessary mounting hardware and 1/2″ pull pin. Sturdy Dual 6″ poly wheels. The Fulton brand bolt-thru swivel mount uses 3-D formed heavy-gauge steel stampings and a proprietary bushing material for a mount with minimal deflection and maximum support. Mount fits up to a 3″ x 5″ trailer frame. Capacity: 1500 lbs., Travel: 12″, Retracted Length: 13″, Extended Length: 25″ (Measured Center of Mount to Bottom of Wheel) Top Clearance: 14.4″ (Measured Center of Mount to Top of Jack) 5 Year Limited Warranty.

PERRIN’s Front License Plate Relocate attaches to the bumper through the front tow hook on your Subaru. This tow hook mount supports the plate without the need for any screws or fasteners which require holes in your bumper. The PERRIN Front License Plate Relocate is contoured to the bumper angle giving your plate equal spacing along the edge of your bumper. The plate holder is made from laser cut plate aluminum which is texture powder coated in a wrinkle black finish. The tow hook adapter is CNC machined aluminum and anodized black for better corrosion resistance. The plate holder is made of thick plate aluminum which is folded in a press break to add rigidity and eliminate any flex. It will not bend or flex under normal conditions like competitive parts.

Fulton brand two-speed winches offer one fast speed for quick uptake and a second low speed for increased mechanical advantage. Our shift lock design allows changing gears without moving the crank handle from shaft to shaft. Just lift the shift lock and slide the shaft into the desired gear position. Neutral, free-wheel position allows quick line pay out without spinning the handle. Optional handbrake, purchased separately, can be installed after the winch is mounted. Fulton has produced the finest winches in the industry for over 50 years. The result of engineering innovation, superior materials, and rugged manufacturing, Fulton winches offer the greatest applications coverage for your unique needs. When selecting a winch you’ll generally need to: 1) determine the environment (wet environment, Saltwater) 2) determine the capacity needed (Fulton winches range from 600 lbs. To 2100 lbs.) 3) determine whether a single-speed or multi-speed winch is required (Cranking resistance) 4) determine whether a braking solution is needed to assist in Managing the load (safety, pay-out). to determine winch capacity needed for pulling total the weight of All items being pulled, I.E. Boat, motor, fuel, gear then divide by 2. If boat, motor, fuel and gear total 2, 800 lbs. You would need a 1, 500 lb. Winch (2, 800 lbs. Divided by 2 = 1, 400 lbs.). If using a steep incline launch, divide by 1.5 instead of 2 due to the increased load on the winch from the incline. For lifting, select a brake winch based on the amount being lifted, I.E. If lifting 1, 450 lbs. You would need a winch rated at 1, 500 lbs.