Top 10 Pressure Washer Pumps Ebay

In some instances, the pump may need to be removed to change engine oil. 

Some specific pressure washers may require longer bolts and spacers to mount the pump to your engine. 

These bolts and spacers are not included, but may be purchased at your local hardware store.  

Common bolt sizes: Two – 5/16″ 18 x 2 1/2″ , One – 5/16″ 18 x 3 1/2″

PARTS COMPATIBILITY:

Specific models stated in the listing are potential matches only and NOT a guarantee of compatibility.

(Even if two pieces of equipment share the same year/make/model, they can and often do have different part numbers).

The only way to ensure the correct replacement is with the OEM part number. The customer is responsible for verifying their OEM part number.

It is the customers responsibility to make sure that this is the correct item/part for their unit. If you are unsure if this is the correct item/part, please contact The ROP Shop, we would be more than happy to help you.

Product Description

Genuine Briggs & Stratton replacement manifold for small frame pumps.

From the Manufacturer

Genuine Briggs & Stratton replacement manifold for small frame pumps.

This is a Genuine OEM Homelite Himore 3100psi Pressure Washer Pump + pressure release valve. Himore 3100 PSI 3/4″ horizontal shaft pump. Hole distances: 2-5/8″ center to center between outer holes. 1-7/8″ from center hole to outer holes. Pump comes pre-oiled. Homelite OEM Part # 308653071 Valve part # 678169004 Also replaces obsolete # 309515001 Bolts directly to gas engines up to 6.5hp (horizontal shaft only) 2.5 gpm @ 3100 psi (w/6.5 hp) 3/4″ Hollow shaft (Most common shaft size on horizontal gas engines up to 6.5 hp) 22mm Twist Couple Type Discharge fitting Filled With Oil Chemical Injector 1 Year Warranty

2400-2700 PSI, Flow Rating of 2.4 GPM, with 7/8″ and 3 mounting holes. INCLUDES THERMAL RELEASE VALVE. SPECS: FITS 7/8″ Inch (22.225mm) SHAFT VERTICAL CRANK ENGINES. MOUNTING BOLTS: FROM MAIN CENTER SHAFT TO EACH MOUNT BOLT IS 4″ – CENTER TO CENTER SPACING BETWEEN MOUNTING BOLTS IS: 7 11/16″ – 6 3/16″ – 6 7/16″

Tackle the toughest pressure washing applications with the Valley Industries Universal Wet Sand Blast Kit. Easily strip paint, remove rust, graffiti and stains while eliminating the dust that comes with sandblasting. Designed with durability and performance in mind, easily reach 4, 000 PSI and 10 GPM. Features a ¼” male plug inlet to make connections to your pressure washing wand a breeze. Includes 18 feet of suction hose that doesn’t wear when using sand. Also includes a premium tungsten carbide nozzle for increased durability and a stainless steel nozzle tip for continued performance.

Note: Please review all product information to ensure that this product is compatible with your unit. A Message to the Customer: The ROP Shop staff constantly strives to provide clear and concise product information. We understand that sometimes it can be difficult to confirm product compatibility. It is your responsibility to confirm this is the correct product you need; therefore, we encourage all customers to fully review the information provided in this listing prior to purchase. Nothing is worse than having to return a product, trust us…we get it. Let’s work together to avoid this! If you are unsure as to whether or not this is the correct product for your unit, please ask. If you seek assistance we will need as much of the following information as possible, if applicable, to help you find the product you are looking for:ModelSpec and/or Type NumberCode and/or Serial NumberYear Our knowledgeable product specialists are always willing to help you verify product fitment. Stay rugged, my friend. – The ROP Shop Staff

Pressure Washer Pump, 2800psi, Vertical 308653045 /308653052 2800 psi 2.5 gallons per minute Pre-filled with oil and ready to use Mounting Bolts Spacing between mounting bolts: 7 11/16″ – 6 3/16″ – 6 7/16″ 7/8 shaft Fits Honda GC135, GX140, GC160, Briggs and Kohler engines with 7/8 inch diameter shaft Will NOT fit 3/4” shaft motors, these motors require different pump Thermal Relief Valve IS Included but will need to be installed opposite the inlet fitting. WHEN MOUNTED, the inlet and outlet will point in the OPPOSITE DIRECTION as the spark plug. This part is compatible with the following machines: Homelite HL80833 3-N-1 Hi-Speed Gasoline Pressure Washer UT80709 Pressure Washer UT80911 Pressure Washer UT80911A Pressure Washer UT80709A Pressure Washer UT80835 3-N-1 Hi-Speed Pressure Washer UT80933 3-N-1 Hi-Speed Pressure Washer UT80993 Pressure Washer UT80993A 2700 PSI Gas Pressure Washer GC80747 G-Clean Pressure Washer HLCA80710 Pressure Washer HU80709 Pressure Washer HU80911 Pressure Washer HU80709A Pressure Washer HU80911A Pressure Washer HU80714 Pressure Washer HU80915 Pressure Washer HU80715 Pressure Washer HU80722 Pressure Washer HU80722A Pressure Washer HU80833 3-N-1 Hi-Speed Gasoline Pressure Washer HU80833A 3-N-1 Hi-Speed Gasoline Pressure Washer HUCA80709A Pressure Washer PS262311 Pressure Washer PS80944 Pressure Washer PS80946 Pressure Washer PS80979 Pressure Washer PS80979A Pressure Washer UT80993B Pressure Washer UT80993D Pressure Washer WF80710 Pressure Washer WF80911 Pressure Washer HL80835 3-N-1 Hi-Speed Gasoline Pressure Washer UT80993E Pressure Washer UT80993F Pressure Washer Ryobi RY80930 Pressure Washer

PARTS COMPATIBILITY:

Specific models stated in the listing are potential matches only and NOT a guarantee of compatibility.

(Even if two pieces of equipment share the same year/make/model, they can and often do have different part numbers).

The only way to ensure the correct replacement is with the OEM part number. The customer is responsible for verifying their OEM part number.

It is the customers responsibility to make sure that this is the correct item/part for their unit. If you are unsure if this is the correct item/part, please contact The ROP Shop, we would be more than happy to help you.

PARTS COMPATIBILITY:

Specific models stated in the listing are potential matches only and NOT a guarantee of compatibility.

(Even if two pieces of equipment share the same year/make/model, they can and often do have different part numbers).

The only way to ensure the correct replacement is with the OEM part number. The customer is responsible for verifying their OEM part number.

It is the customers responsibility to make sure that this is the correct item/part for their unit. If you are unsure if this is the correct item/part, please contact The ROP Shop, we would be more than happy to help you.