Top 10 Lowes Water Heater Warranty

Product Description

This Smart Technology electric tankless water heater is configured as a “whole home” model for climates where incoming water temperature is 67°F and above. This model is well suited for heating up to 2-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 67°F and an output setting of 105°F. Digital Temperature Control allows you to set your temperature in increments of 1 Degree. This model can also be used in colder climates as a Point of Use for a sink or other low flow application. All tankless water heaters are sized based on flow rate and temperature rise, and there is a direct relationship between the two. So if used in a cold area requiring a high temperature rise, it will be more limited in the amount of fixtures (gallons per minute) it can heat at one time compared to a warmer climate. When sized properly this water heater will provide endless hot water and only consume the energy needed, giving the user complete control. Prior to purchase and installation please verify this model is the right size for the expected demand and electrical requirements. The ECO 11 requires a minimum 125 amp electrical panel for installation with (1) 60 amp double pole breaker connected to (1) set of #6 awg wire. Plumbing connections are 1/2″ compression fitting with the option of 1/2″ NPT adapter included. For additional assistance please feel free to contact our support center at 877-474-6473.

NOTE : 11Kw at 220 is equal to 13kw at 240.

From the Manufacturer

This Smart Technology electric tankless water heater is configured for climates where incoming water temperature is 67 Degree F and above. This model is well suited for heating up to 2-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 67 Degree F. Digital Temperature Control allows you to set your temperature in increments of 1 Degree. This model can also be used in colder climates as a Point of Use for a sink or other low flow application. Prior to purchase and installation please verify this model is the rights size for your hot water needs and electrical requirements.

The SIMPSON MegaShot 3200 PSI at 2.5 GPM is ideal for use on siding, driveways, cars, RV’s, paint prep and more. This is a perfect option for homeowners, because it’s lightweight, easy to maneuver and can be transported by one person. You’ll get optimum performance with minimal effort. The MSH3125 is equipped with a HONDA GC190 engine, reliable OEM axial pump, 25-ft kink & abrasion resistant hose, ergonomic spray gun and 5 stainless steel Quick-connect nozzles.

Created for the home and shop, the SIMPSON MegaShot series is perfect for the “Do-it-Yourselfer” looking for maximum performance with minimal investment.  The MegaShot Series is simple to use and great for cleaning decks, patios, house siding, outdoor furniture, and prepping home exteriors for painting. Its compact design is lightweight and small enough to be easily transported by one person. The MegaShot Series is designed for optimum performance in the harshest environments, and renowned for being consistently easy to start.

2 Year limited HONDA consumer engine, 1 year limited pump, 5 year limited frame and 90 day accessory
1 Year limited pump warranty
5 Year limited frame warranty
90 Day limited accessory warranty

The InSinkErator HOT150 Instant Hot Water Dispenser System is the newest and most affordable addition to the Invite series. So simple and useful, once you use it, you will love it instantly.

With near-boiling water at your fingertips, you can enjoy the convenience of instantly preparing gourmet coffee and hot tea, steaming vegetables in a flash, warming baby bottles in seconds, removing candle wax from candle holders with ease, cleaning without the use of harsh chemicals, removing stubborn lids and labels, and so much more.

The HOT150 instant hot water dispenser features a modern Chrome finish hot water faucet and 750-watt, 2/3-gallon stainless steel tank that delivers near-boiling water. An easy-adjustable thermostat allows you to control the temperature from 160 degrees F to 210 degrees F.

The HOT150 system is designed for do-it-yourself installation, with no special plumbing required. Convenient tool-free tank connections and dry-start protection provide easy set-up and peace of mind. The system requires an unswitched AC power outlet, dedicated control valve with compression fitting, and T-fitting. The faucet requires a standard 1-1/4-inch to 1-1/2-inch diameter hole for installation with a maximum counter thickness of 2 inches.

InSinkErator covers the HOT150 instant hot water dispensers with an exclusive 1-Year We Come to You In-Home Full Service Limited Warranty. This warranty includes free house calls (including parts and labor) for the entire warranty period.

The MP PC2 Mini pump from Maresh Products is a 1/10th HP multi purpose transfer pump capable of transferring up to 330 Gallons per hour. This lightweight, portable utility pump is ideal for household applications and/or many emergency uses. Compact and easy to store, the MP Mini pump is also the perfect solution for household and light commercial use.

1/4 hp manual submersible utility pump with 10′ power cord and oil cooled motor; requires monitoring to turn pump on/off; will drain from flat surfaces to 3/8″ and handles solids up to 1/8″ diameter; up to 1980 gph. Download the User Manual under the Technical Specification section of this page for safety, installation, troubleshooting, and warranty information. Utility pumps are used to transfer water from one source to another or to drain water from surfaces. These pumps are typically used for draining water from sinks or tubs with clogged drains, emptying pools or spas, draining excess water on flooded basement floors, etc. Utility pumps are either portable or submersible. Portable means they are designed to operate outside the water with a hose placed in the water. Submersible means they are designed to be submersed in water. Submersible pumps can be provided with no on/off switch, which means they are manually operated or have a ‘smart’ switch that will detect the absence of water and will therefore shut off the pump automatically. Since most utility pumps are made of plastic and rubber components, running them dry (running them without water circulating in them), will result in the pump overheating and melting the plastic and rubber components. As a result it is required that you physically monitor pumps provided without switches so you can unplug them when the task is complete. ECO-FLO Products exceed the competition in flow and head performance. Test laboratory and ISO 9000 facility account for quality built pumps that are all CSA approved. The ECO-FLO commitment is to produce pumps for the long term at the best value. Click on the ECO-FLO Products link at the top of this page to see more pump options from ECO-FLO Products.