The Best Briggs And Stratton Pressure Washer Pump Saver

Pump guard is perfect for storing your pressure washer for more than 30 days. It protects the pump & other components from damage caused by the cold temperatures to -25° F. Minimizes harmful corrosion by lubricating valves, seals & pistons to prevent sticking. This will ideally protect pumps Between uses.

Karcher’s Pump Guard is specifically formulated to prolong the life of your pressure washer. This specially formulated solution will protect your pressure washer from corrosion, premature wear and freezing (down to -25º F). It also adds lubrication to your pressure washer’s valves and seals to prevent sticking in the future. Ordinary anti-freeze is insufficient in this respect and is not recommended. Works with all Karcher electric and gas powered pressure washers. Put your guard up today.

Note: Please review all product information to ensure that this product is compatible with your unit. A Message to the Customer: We constantly strive to provide clear and concise product information. We understand that sometimes it can be difficult to confirm product compatibility. It is your responsibility to confirm this is the correct product you need; therefore, we encourage all customers to fully review the information provided in this listing prior to purchase. Nothing is worse than having to return a product, trust us…we get it. Let’s work together to avoid this! If you are unsure as to whether or not this is the correct product for your unit, please ask. If you seek assistance we will need as much of the following information as possible, if applicable, to help you find the product you are looking for: Model, Spec and/or Type Number, Code and/or Serial Number, or Year

Note: Please review all product information to ensure that this product is compatible with your unit. A Message to the Customer: We constantly strive to provide clear and concise product information. We understand that sometimes it can be difficult to confirm product compatibility. It is your responsibility to confirm this is the correct product you need; therefore, we encourage all customers to fully review the information provided in this listing prior to purchase. Nothing is worse than having to return a product, trust us…we get it. Let’s work together to avoid this! If you are unsure as to whether or not this is the correct product for your unit, please ask. If you seek assistance we will need as much of the following information as possible, if applicable, to help you find the product you are looking for: Model, Spec and/or Type Number, Code and/or Serial Number, or Year

It is the customers responsibility to make sure that this is the correct part for their unit. New vertical 7/8″ shaft pressure washer water pump for many different makes and models. SPECS: 7/8″ shaft, aluminum head, 2800 PSI, 2.3 GPM, Includes thermal release valve, chemical injector, garden hose hookup (22mm outlet), pump oil already installed, 1 year warranty against manufacturer defects. If you are not sure if this is the correct pump for your unit please send us model number off your machine and we will gladly check for you. PLEASE NOTE: Spacers may be required for installation depending on motor configuration. Spacers are used in the case that the pump arm(s) hits the engine. Pump may require longer mounting bolts due to its thicker flange, for added strength.

Angove Riverberry offers the RMW22G24-EZ and RMW22G24-EZ-SX 2,400 PSI triplex plunger pumps in two different mounting configurations. This pump is for vertical gas engine driven units. Please reference the pictures below showing the mounting difference between the two models. Specifications: 2.2 GPM at 2,400 PSI and spins at 3,400 RPM. This pump mounts directly on to the engine shaft by using a keyed hollow shaft connection system. The mounting flange provides a convenient connection to most 7/8″ diameter shaft vertical gas engines in 4 – 7 HP (reference the cc to HP chart) and fits most OEM carts. The pump includes a built-in pressure control valve, downstream chemical injection system, EZ start valve and thermal relief valve. 3-piston alternating volumetric pumps for use on cleaning units Can be directly coupled to various types of motors Different delivery connections available Optional detergent suction system Integral regulating valve Pump body in die-cast aluminum alloy Pistons driven by swash plate mechanism Two bearing systems, to support the pump shaft and pistons in hardened and tempered steel Pump head in pressed brass Double gasket sealing system Intake valves fitted above the pistons for greater efficiency RPM: 3,400 Shaft Size: 7/8″ Max GPM: 2.2 Max PSI: 2,400 Inlet Thread: 3/4″ GHA Discharge Thread: 22mm x 1.4M Specifications Max GPM- 2.2 Max L/Min- 8.3 Max PSI – 2400 Ambar- 166 Power EBHP- 3.6 Bore Die mm- 12 Stroke mm- 8.3 Crankshaft ID Stamp- 5 Inlet- 3/4″ GHA Outlet- 22mmx1.4 M Max Temp- 140 Degree F Oil Capacity (oz.)- 2.2 Weigh-t 7.3 RPM- 3400 Shaft Size- 7/8″ Shaft Version- D Shaft Type- Hollow

The Briggs & Stratton 5-in-1 Quick-Connect Pressure Washer Nozzle combines five spray patterns into one convenient nozzle, meaning you never have to worry about losing spray tips again, and switching between spray patterns is easy. Spray patterns include 0 degrees, 15 degrees, 40 degrees, Soap, and Flush, providing the flexibility of cleaning a variety of surfaces from patio furniture to concrete garage floors. Switching between spray patterns is as easy as push, turn, and click with its locking dial and button. Connect the 5-in-1 nozzle to quick-connect wands and attach to most brands of gas pressure washers up to 3200 PSI.