Top 7 Accuspray 3M Series10

3M Accuspray Atomizing Head Refill Nozzles for PPS 2. 0 are designed for the 3M Accuspray paint gun and PPS 2. 0 Spray Cup System. Replacement nozzles come in a range of sizes so you can spray numerous applications with one gun. The blue 1. 2 mm size is ideal for lower-viscosity materials like stain. Refill nozzles can be used 5 to 10 times, then removed and replaced, giving you the performance of a new gun on demand and at a fraction of the cost. 3M Accuspray Spray Gun System with PPS 2. 0 is a convenient all-in-one solution for measuring, mixing, filtering and spraying paint materials. Unlike with conventional aluminum or other metal paint cup systems, with PPS you don’t have to mix paint in extra cups and filter it into a paint reservoir, so you waste less paint. And with a fresh lid and liner for each mix, there’s less risk of outside contamination. You can also increase productivity in prep and cleanup time by as much as 50% and use up to 70% less cleaning solvent over conventional paint cup systems. PPS 2. 0 features improvements like a quarter-turn locking collar with each lid, domed lid design for better spray performance and wider lid fluid spout. Each paint cup has convenient printed-on universal mix ratios for accurate mixing and a clear access window for easy visibility.

3M PPS Series 2.0 Spray Cup System is our next generation, highest performing disposable spray cup system for mixing/measuring, filtering, spraying in any direction (360° spray rotation) and protecting coatings not in use. Each lid and liner kit contains 50 disposable lids with integrated collars and full diameter filters, 50 disposable liners, 1 reusable hard cup and 32 sealing plugs.

An HVLP gravity pressurized spray gun, to be used with a pressurized H/O cup system to provide superior application of high viscosity coatings. Kit contains 1 each HGP spray gun and 4 atomizing heads – 2 each 1.8mm nozzles and 2 each 2.0mm nozzles. Placing a New nozzle on the spray gun over a dirty needle will score the seals in the nozzle to make paint it leak back through the gun and come out in front of the trigger. To many uses of the nozzle to where the seals were wore out in the nozzle or damaged from solvent, recommended is 8-10 uses, and DO NOT Leave solvent in the nozzle or use a gun cleaning machine to clean the nozzle. So the gun does not need replacing, just replace the Atomizing nozzle, but make sure the needle is clean before placing New nozzle on the gun body.

3M 91-152-A gun body. For use with series 10 spray gun, series 11 spray gun, series 14 spray gun, series 15 spray gun.

Our 3M Accuspray ONE Spray Gun Kit delivers the performance of a new spray gun, on demand and at a fraction of the cost. You’ll find a full selection of Accuspray replaceable atomizing heads for a range of applications. A 1-piece composite Accuspray ONE Spray Gun body eliminates the need for maintenance kits. Also includes an air control valve and spray gun hanger.

3M Accuspray Atomizing Heads are designed specifically for use with 3M Accuspray ONE Spray Guns. This selection of replaceable heads makes for the incredibly fast, efficient application of low-, medium- and high-viscosity materials from one gun. Technicians simply remove and replace the head for the performance of a new spray gun on demand. See-through heads are easily cleaned and reused.

3M Accuspray Atomizing Heads are designed specifically for use with 3M Accuspray ONE Spray Guns. This selection of replaceable heads makes for the incredibly fast, efficient application of low-, medium- and high-viscosity materials from one gun. Technicians simply remove and replace the head for the performance of a new spray gun on demand. See-through heads are easily cleaned and reused.