The Best Alfa Romeo Giulia Rs 1800

CX800.1 Mono Amplifier

This CX-Series Mono Amp is now one-ohm stable, giving you even more power and wiring options for your system! Using a Class-D power plant, the CXA800.1 features a variable bass boost with KickEQ, giving you as much as a 6dB of extra bump with a simple turn of the optional CXARC Remote Bass Controller. A powerful 12dB crossover and 24dB subsonic filter is included, letting you quickly tune your system to perfection. Use the full-range outputs to expand your system with other bass amps, or a full-range amp to complete your system.

CX-Series Amplifiers accept up to 40 volts (400 watts) of speaker-level input signal. This kind of flexibility both makes line-out converters unnecessary.

Feature Hightlights:
Efficient Class-D amplifier
Three-second turn-on/off delay to eliminate unwanted interference
Variable 12dB crossovers provides control to dial in perfect sound
KickEQ 6dB variable bass boost for those additional low frequencies
24dB subsonic filter for protection from potentially damaging frequencies
FIT+ (Fail-safe Integration Technology-PLUS) means it works with nearly every radio
Accepts up to 40-volt input signal
Small footprint for easier installation
Compatible with CXARC (link to remote) Remote Bass Control
Vertical mounting hardware included for another unique look

Specifications:
Power (watts/ch) 4 Ohm – 300×1
Power (watts/ch) 2 Ohm – 600×1
Power (watts/ch) 1 Ohm – 800×1
CXRC Remote Bass Capable (sold sep.) – yes
Dimensions (in, cm): Height: 2-3/8, 5.9; Width: 6-3/4, 17; Length: 8-1/8, 20.6
Frequency Response (Hz): 25-200, +0/-1dB
Input Sensitivity: 250mV-10V (Low Level)1V-40V (High Level)
Signal-to-Noise Ratio: >95dB, a-weighted, re: rated power
Active Crossover: Variable Lo-pass 50Hz–200Hz, 12dB/octave
Subsonic Filter: 25Hz @24dB/octave
KickEQ Boost Variable 0-6dB @40Hz

The first view of the Boss RIOT Series amplifiers may deceive you. The elegant lines of the R1100M are a textbook exercise in minimalist design. But appearances can be deceiving; the beauty of its design masks the raw power, and reproductive clarity this amplifier produces for your auditory pleasure. This beauty performs like a beast, delivering the clean, powerful, sound you demand from your car stereo.

Features: Remote Subwoofer Level Control Blue Illuminated BOSS Logo Dimensions – 10-7/16 W x 2-1/4 H x 9-1/8 L

Rubicon Nano 2000W Class D 5-CH Marine Amplifier. Military Grade SMT PCB Maintains Dynamic Performance. Direct Short, Thermal, & Overload Circuits Protect Amplifier. 200mV-6V Low Level RCA or High Level Signal Input. Quick Disconnect High Level Wire Harness Included. Easy DIY Install Single Sided Terminals & Controls. 4g Power In out Terminals & 12g Speaker Output Terminals. Variable 12dB High Pass, Low Pass, & Subsonic Crossovers. 12dB Bass Boost Increases Low Octave Harmonics.

Boost your Vision with X-tremeVision! Philips X-tremeVision headlight bulbs offer up to 100% more vision (compared to a standard minimum legal requirements in low beam headlamp test results), for drivers who want to see farther. Based on a unique filament design and optimized geometry, X-tremeVision is engineered with state-of-the-art technology for ultimate performance and more light where it matters the most.

Five Channels of Fun The CXA660.5 Amplifier is built to be the complete package in one cool-looking amp.

The CXA660.5 Amplifier uses powerful Class A/B technology to power four mid/high-range channels and an ultra-efficient Class D power plant for the bass channel. The amp also comes equipped with FIT+ (Fail-safe Integration Technology-PLUS), giving you superior clarity and dependability.

KickEQ variable bass boost gives you as much as a 6dB of extra bump with a simple turn of the knob. A powerful 12dB crossover and 24dB subsonic filter is also included.

Feature Highlights:
Class A/B full-range channels
Class D bass channel included for one amp to run an entire system
Three-second turn-on/off delay to eliminate unwanted interference
Variable 12dB crossovers provides control to dial in perfect sound
KickEQ 6dB variable bass boost for those additional low frequencies
FIT+ (Fail-safe Integration Technology-PLUS) means it works with nearly every radio
Accepts up to 40-volt input signal
Small footprint for easier installation
Vertical mounting hardware included for another unique look

Specifications:
MODEL:CXA660.5
Power (watts/ch) 4 Ohm Stereo: 65×4
Power (watts/ch) 2 Ohm Stereo: 90×4
Power (watts/ch) 4 Ohm Mono: 180×2
Power (watts/ch) 4 Ohm Mono Sub Ch: 150×1
Power (watts/ch) 2 Ohm Mono Sub Ch: 300×1
CXRC Remote Bass Capable (sold sep.): yes
Dimensions (in, cm): (all models 2-3/8, 5.9H x 6-3/4, 17 W x …L): 14-1/8, 35.7
Frequency Response (Hz): 10Hz-20kHz
Frequency Response (Hz – Sub Ch.): 25Hz-200Hz
Input Sensitivity: 250mV-10V (Low Level) 1V-40V (High Level) Signal-to-Noise Ratio: 90dB
Active Crossover: Amp 1-2: High Pass 10-200Hz @ 12dB/Octave Sub Channel: Low Pass 50-200Hz @ 12dB/Octave
Subsonic Filter: 25Hz @24dB/Octave
KickEQ Boost: Variable 0-6dB @40Hz

If you need an amp that doesn’t have a lot of frills but hammers out great music without distortion, take a look at the Autodesk TA Series 2-Channel Class AB Amp (2,000 Watts). The TA Series amps include classic Autodesk technology like Pro-Fi MOSFETs to improve music output and Sound Shield to minimize heat buildup in the aluminum heatsink. Tread loudly with Autodesk.