We spent many hours on research to finding bosch ev1 fuel injectors, reading product features, product specifications for this guide. For those of you who wish to the best bosch ev1 fuel injectors, you should not miss this article. bosch ev1 fuel injectors coming in a variety of types but also different price range. The following is the top 10 bosch ev1 fuel injectors by our suggestions
770 reviews analysed
1. Set 8 42lb 440cc EV1 Fuel Injectors for GM LT1 LS1 LS6 Ford Mustang SOHC DOHC
Feature
- These High Impedance fuel injectors are not made by the original equipment manufacturers(OEM)(BOSCH & VDO etc.)They have been 100% tested and exactly match the internal coil resistance and fuel flow rate of OEM fuel injectors.
- Length: 3″ (74mm)
- The individual flow characteristics and fuel atomization of above fuel injectors are almost same to or superior to the OEM and will help accelerate response time , save gasoline and improve MPG.
- O-Ring Diameter: 14.5mm
- Quantity: 8 Fuel Injectors
2. KIPA 8Pcs Fuel Injectors For Deka TOYOTA Honda BMW Audi Chevrolet Chrysler Ford Dodge GM V8 LT1 LS1 LS6 With 80Lb 850cc Engines Bosch EV1 Replace Siemens OEM # FI114992 110324 109991 FI114991
Feature
- 8Pcs Fuel injectors Replace for OEM # FI114992 110324 109991 FI114991
- 8Pcs Fuel Injectors For Deka TOYOTA Honda BMW Audi Chevrolet Chrysler Ford Dodge GM V8 LT1 LS1 LS6 With 80Lb 850cc Engines Bosch EV1 Connector
- High Quality and Low Impedance performance characteristics with High Impedance Compatibility
- Standard Long Length 60mm 0-ring to o-ring
- Series: For DEKA 4 (For DEKA IV ) Connector: For Bosch EV1
Description
8Pcs New Fuel Injectors For Siemens FI114992 Deka 80LB 850cc EV1
Replace For Siemens Injectors Part # FI114992 110324
Interchange Part #: 109991, FI114991
Package includIng:
8 NEW Fuel Injectors
Specifications:
Static Flow Rate: 80lb/hr = 875 cc/min
Dynamic Flow Rate : 18.6 mg/pulse 2.5ms PW, 20 ms Period
Coil Resistance: 12 Ohms (This high-impedance injector will work with all factory ECM/PCM injector drivers)
Connector: Bosch EV1
Series: DEKA 4 ( DEKA IV )
O-Ring Type: Viton
3. MOTOALL Fuel Injector Connector EV1 OBD1 Plug Wire Harness Pigtail Wiring Loom Clip Cut & Splice 2-Wire Female – 8pcs
Feature
- 2-wire, female plug
- Replace Minitimer Bosch Jetronic # 551253
- Fit ANY RC, Bosch EV1 Fuel Injectors
- Fit Volvo, BMW, Mitsubishi, Honda, Ford, Toyota and many other models
- Please check the pictures to ensure fitment
- Package includes: 8pcs OBD1 EV1 Style Fuel Injector Connector Wiring Plugs Clips as pictured
Description
Specification:
Cut and splice style, you can choose the length of the plug and eliminate unnecessary electrical connections when using the plug and play style clips.
Replace part numbers:
EV1-8
Replaces Minitimer, Bosch, Jetronic, 551253
Fitment:
Please look at the pictures to make sure these are the connectors you need.
Fit ANY RC, Bosch EV1 Fuel Injectors
Package includes:
8pcs OBD1 EV1 Style Fuel Injector Connector Wiring Plugs Clips as pictured
4. MOSTPLUS 8pcs Flow Matched Fuel Injectors for Ford 4.6 5.0 5.4 5.8 0280150943 822-12110
Feature
- OEM Part Number: 0280150956 0280150718 0280150943 822-11111, 0280150943 0280150556 0280150939 0280150909, F1ZE-C2A E6TE-A2B E5TE-A3B E6TE-A3B
- Features: Quantity: 8 Fuel Injectors
- O-Rings Included: Yes, preinstalled
- Injector Design: Metal & composite plastic
- Orifice Type: 4 holes
- Disc Connector Type: Bosch EV1
- Filter Design: Basket filter design at inlet
- Spray Pattern: 15 Degree Spray Cone
- Specification: Coil Resistance: 12 Ohms / High Impedance Static
- Flow Rate: 215cc/min at 43PSI
- Gain: 0.12ms/MG
- Offset: 0.055ms
- Turn on time @ 14VDC: 1.14ms
- Turn off time: 0.85ms @ 300KPa
- Amperage: 1.0 Amps
- Pressure: Min 30PSIG/ Max 100PSIG
- Please check your car information before purchase.
5. MOTOALL Fuel Injector Repair ORings Kit For Ford V8 5.4L 4.6L, Lincoln and Mercury
Description
Package includes:
8x Spacers
8x Fuel Filters
8x Upper Viton O-Rings
8x Lower Viton O-Rings
8x Pintle Caps
6. Bosch 1287013003 Fuel Injector Connector
Description
For over 100 years the name Bosch has been associated with the automotive industry. From performance spark plugs, to wiper blades, oxygen sensors, starters, alternators, spark plug wire sets and more, the Bosch brand is recognized for premium quality.
7. MOSTPLUS 24LB 0280155715 Fuel Injectors for Chevy Ford Dodge LS1 LT1 5.0L 5.7L V8 250cc (8 Pcs) ECU TUNING Required
Feature
- OEM Part Number；0280155715 0280150947 0280150965； FRPP M-9593-LU24, M-9593-LU24A
- Note: Some models require ECU Tunning, would you pls verify your stock injectors flow rate.
- Design: Bosch GEN III EV1 Style Fuel Injector
- O-Rings Included: Yes, preinstalled
- Connector Type: EV1
- Condition: 100% BRAND NEW
- Quantity: 8 Fuel Injectors
- Static Flow Rate: 24 lb/hr = 250 cc/min @ 43.5PSI ( 300kPa )
- 2 Years Warranty after receiving
8. 80lb/h Siemens Deka High Impedance (Short Style) with EV1 Connector – A2C32624700 FI114700 (37.5mm)
Description
These injectors flow 80 lbs/hr at 43.5 PSI (3 BAR) and even more at greater PSI! In addition, these units are high-impedance. Despite the high flow rate, they are linear and controllable at low pulse widths and have been used in ULEV applications! This allows you to use a larger injector than normally possible without hurting idle and low speed driveability. Adding to the flexibility of application, these units are high-impedance; making them compatible with most ECUs, while delivering the most flow available in a High-Impedance injector.These injectors are able to function at high fuel pressures and don’t exhibit the high fuel pressure handling problems found with many other high flow high-impedance injectors. This makes these injectors very well suited to turbocharged and supercharged applications that see high fuel system pressures.**We recently had a customer wanting to return injectors because his tuner did not know how to tune them. This is not acceptable because we cannot resell a used injector as new anymore once they have been used. So there are no returns accepted for used and installed injectors for obvious reasons. You must do your own research to determine if these injectors are compatible with your vehicle and if you are able to tune them for your specific application. Our job is to sell you an item as advertised and to ship it quickly. We cannot be held responsible to know if your tuner can tune them or if they fit your specific application. Returns are only accepted on new unused items as you received them. This is pretty common sense policy for fuel injectors in order to keep prices low and is typically not a problem, but wanted to have it in the description so that you are aware to verify through research that you are buying something that is compatible with your specific application.**
9. MOSTPLUS Fuel Injectors 0280155710 for 87-98 Jeep Cherokee Wrangler Comanche 4.0L (Set of 6)
Feature
- Note: These fuel injectors are not made by the original equipment manufacturers(OEM)They have been 100% tested and exactly match the internal coil resistance and fuel flow rate of OEM fuel injectors.
- Application: for 87-98 Jeep 4.0L
- OEM Part Number: 0280155710, 0280155700, 0280155703
- Quantity: 6 Fuel Injectors
- Please check your car information before purchase.
10. MOSTPLUS Fuel Injector Connector Wiring Plugs Clips Fit EV1 OBD1 Pigtail Cut & Splice Set of 8
Description
This is one set of 8 OBD1 EV1 center notch, square plug style injector clips. Customers will receive a set of 8 OBD1 EV1 style injector clips exactly as pictured. These are the cut and splice style, which is very easy to do, and better since you can choose the length of the plug and eliminate unnecessary electrical connections when using the plug and play style clips.
Conclusion
By our suggestions above, we hope that you can found Bosch Ev1 Fuel Injectors for you.Please don’t forget to share your experience by comment in this post. Thank you!
