The Best Delonghi Pac C100el Compressor Not Starting

Product Name: EPAuto 120W Portable Tire Inflator/ Air Compressor

Important Information before your Purchase

It is for 12 Volt DC ONLY. Equipped with 12V-DC Cigarette Lighter Socket Plug”, NOT 110V AC plug
DO NOT SUPPOT 24 Volt.

Specification:

Working voltage: DC12V
Rating power: 120W
Inflating Speed: 1.06 CFM
Min. Amp: 10 Amps
Maximum Amp: 15 Amps
LED flashlight: Bright Torch
Maximum Working Pressure 70 PSI
Display Units: KPA, PSI, BAR, KG/CM
The power cable is with a 15 amps fuse, and there is a backup fuse in the package.
Overheat protector will shut of the unit when it exceeds 167°F
CE certified

Operating Instructions:

1. Make sure the power switch is at OFF position and the vehicle engine is running.
2. Remove the dust cap from the tire valve, and then attach the air chuck to the tire valve stem, and screw onto tire’s valve stem.
3. Plug the power cord into a 12V cigarette lighter socket.
4. Press (M) button to choose the display unit. (4 units available: PSI, KPA, BAR, KG/CM). Press (-) or (+) button to set the desired pressure, and then wait until it stops flashing.
5. Turn on the power switch. The compressor will automatically stop inflating once the desired pressure is reached.
6. When the desired pressure is reached, turn OFF the power.

Valve connector detaching with desired pressure:

When you detach the valve connector, the tire valve would keep releasing air until the connector is fully detached. It’s normal and can be accepted by setting up desired psi value on the machine. For example when you set 32 psi, the machine will keep pumping to 32.5 psi before it stops which consider the loss will be happening when you detach the valve connector.

The Bostitch BTFP02012 6 Gallon 150 PSI Oil-Free Compressor is portable and lightweight. It features an oil-free, maintenance-free pump that delivers 2.6 SCFM* @ 90PSI and a maximum tank storage of 150 PSI for long tool run time with quick recovery. The 78.5 DBA** rating is ideal for a quiet work environment. It has a BOSTITCH high efficiency motor for easy start up in cold weather or extension cord application [14 ga or larger, 50 ft. (15.2 m) or less]. BOSTITCH high flow regulator and couplers to maximize air tool performance. It has two universal couplers to easily support two users. At only 29 lbs weight, this unit is easy to carry and store. Specs: Max Tank Storage PSI = 150, Electric Power Supply, Oil-Free pump, SCFM @ 90 PSI = 2.6, Tank Size = 6-gallon.

DeWALT DCC020IB 20-Volt High-Pressure Corded/Cordless Air Inflator

The CALIFORNIA AIR TOOLS 8010 Ultra Quiet & Oil-Free Air Compressor is designed to be one of the quietest air compressors in the industry having only 60 decibels of sound. The powerful 1.0 HP  motor operates at only 1680 RPM creating less noise and less wear. The Oil-Free Dual Piston Pump System is engineered for high performance and durability. The CAT-8010 Air Compressor has a Oil-Free Dual Piston pump designed to have a life cycle before wear of 3000 Plus hours compared to other comparable air compressors with life cycles of 500 hours or less. The Oil-Free pump allows for use in a variety of temperatures and uneven terrains. The large 8.0 Gallon Steel Air Tank is Lightweight (54 lbs) and the wheel kit makes it very easy to transport. This air compressor is ideal for anyone working inside where noise is a major issue.

DEWALT DWFP55126 6 Gal 165 PSI Pancake Compressor features a high efficiency motor for easy start up in cold weather or extension cord application. [14 ga or larger, 50 ft. (15.2 m) or less]. It also offers a 165 max PSI 6.0 gallon tank (22.7 L) and 2.6 SCFM delivered at 90 PSI pump, which enables long tool run time with quick recovery. The high flow regulator and couplers maximize air tool performance, and a long life oil free pump for maintenance free operation. This unit offers a soft 75.5 dBA noise level for a quiet work setting. A console cover protects controls and is removable to allow easy repair. This unit also features 2 universal couplers to easily support two users, and a ball drain valve for quick & thorough tank draining. It has protective rubber leg covers to prevent marring. It has a convenient cord wrap for easy storage, and its 30 lb weight makes it quite easy to carry/store. Please confirm that the drain valve is fully closed before using the compressor.

The CALIFORNIA AIR TOOLS 10020C Ultra Quiet & Oil-Free Air Compressor is designed to be one of the quietest 2.0 Hp air compressors in the industry having only 70 decibels of sound. The Powerful “New” 2.0 HP (SP-9421) motor operates at only 1680 RPM creating less noise and less wear. The “New” SP Series of Ultra Quiet Air Compressor Motors have been designed to increase duty cycle and allow for longer continuous run times. The Oil-Free Dual Piston Pump System is engineered for high performance and durability. The CAT-10020C Air Compressor has an Oil-Free Dual Piston pump designed to have a life cycle before wear of 3000 plus hours compared to other comparable air compressors with life cycles of 500 hours or less. The Oil-Free pump allows for use in a variety of temperatures (cold starts) and uneven terrains (no oil in the pump). The Easy Start Valve feature allows for a easier start up using less starting amps. The Easy Start Valve releases a small amount of air from the pump at start up to produce a no-load condition allowing the motor to spin freely. This no-load start up requires less amps for an easier start up in cold temperatures. The large 10 Gallon Steel Air Tank with wheel kit makes it very easy to move around the jobsite, shop or garage. Designed for the person looking for Power, Air Flow, Less Service and Maintenance with at Least 30% Less Noise!.

DEWALT DWFP55130 Heavy Duty 200 PSI Quiet Trim Air Compressor

Amazon.com

Makita’s 2.5HP Air Compressor is equipped with Makita’s Big Bore engineered pump cylinder and piston for higher output for two nailers, with less noise and improved job site performance. The MAC2400 delivers industrial power and results with improved durability under tough job site conditions.

View larger

MAC2400 Features PERFORMANCE – Cast-iron cylinder with greater bore and stroke for maximum performance DURABILITY – Runs at a lower RPM (1,720) resulting in greater motor and pump life RELIABILITY – Low AMP draw reduces instances of tripped breakers CONVENIENCE – Oil drain and oil sight glass conveniently located for easy access and maintenance INCLUDES – Oil and 1/4″ universal quick coupler

Tool Specifications Horsepower 2.5 Pump Oil-lubricated Tank 4.2 “Twin Stacked” gal. Performance 90 PSI: 4.2 cfm 40 PSI: 4.8 cfm Maximum Pressure 0 – 130 PSI AMPS 12.3 Noise Level 79 dB Size 19-3/8″x18-3/4″x18″ Net Weight 77 lbs.

2.5 HP with Big Bore Engineered Pump
The MAC2400 is powered by a 2.5 HP motor. The Makita Big Bore engineered pump with cast iron cylinder has greater bore and stroke for increased compression, faster recovery and less noise. The cast iron construction is engineered for increased durability even under tough job-site conditions. The MAC2400 has an oil-lubricated pump and is equipped with a large automotive style filter for increased air intake and greater efficiency. The Big Bore oil-lubricated pump is also more efficient: the MAC2400 runs cooler and at half the RPM of most competitive units, resulting in greater motor and pump life and lower noise. The 4.2 gallon twin-stacked tank sustains an operating pressure of 130 PSI, and delivers 40PSI (4.8 CFM) and 90 PSI (4.2 CFM), enough for two nailers. The low AMP draw reduces instances of tripped breakers and voltage drop that can cause premature motor failure. The roll bar handle provides portability and additional protection, helping it withstand harsh jobsite environments. Additional features include a convenient oil drain and oil sight glass, a tank drain valve that supersedes standard petcock design for easier maintenance, and finned discharge tubing that dissipates heat more efficiently.

Versatile Design for a Range of Applications
The MAC2400 is engineered for low noise, high output and less maintenance, and delivers industrial power and results with improved durability under tough job site conditions. The MAC2400 is just another example of Makita’s commitment to innovative technology and best-in-class engineering.

About Makita Big Bore Air Compressors
Makita Big Bore Air Compressors deliver higher output and less noise for improved job site performance. The Makita Big Bore engineered pump with cast iron cylinder has greater bore and stroke for increased compression, faster recovery and less noise. The cast iron construction is engineered for increased durability even under tough job site conditions. All Makita Big Bore Air Compressors are oil lubricated and equipped with large automotive style filters for increased air intake and greater efficiency. Makita Big Bore Air Compressors deliver industrial power and results with improved durability.

About Makita
Makita is a worldwide manufacturer of industrial quality power tools and offers a wide range of industrial accessories. Makita applies leading-edge innovation to engineer power tools that are more compact and energy efficient, yet deliver industrial strength power and results. Makita U.S.A., Inc. is located in La Mirada, California, and operates an extensive distribution network located throughout the U.S. For more information, please call 800/4-MAKITA (800/462-5482) or visit makitatools.com. Makita is Best in Class Engineering.

Warranty
Every Makita tool is thoroughly inspected and tested before leaving the factory. If you are not satisfied with any Makita tool within 30 days of purchase, return it and Makita will provide a replacement or refund. Each Makita tool is warranted to be free of defects from workmanship and materials for the period of ONE YEAR from the date of original purchase. Should any trouble develop during this one-year period, return the COMPLETE tool, freight prepaid, to one of Makita’s Factory or Authorized Service Centers. Please see makitatools.com for complete details.

What’s in the Box
Makita MAC2400 2.5 HP Air Compressor, oil and 1/4-inch universal quick coupler.

From the Manufacturer

The new MAC2400 – Twin Stack air compressor by Makita is blowing away the competition. With built-in features such as a super quiet motor that draws only 12.3 amps to operate, a lower 1720 RPM rating and a heavy duty Intake Air Filter system like no other, its easy to see how this unit will out last and outperform everyone else. It delivers 4.2CFM @ 90PSI and is equipped with a lever handled ball valve drain system to get rid of condensation build up in the tank . The exclusive finned discharge tubing increases heat dissipation while reducing moisture in the lines and the easily removable cast iron cylinder reduces wear for increased pump life. High quality, maximum performance – just what you expect from Makita.

Product Description

Vertical stand feature and collapsible handle allows user to save space by transporting or storing the compressor in a vertical position. 5. 0 SCFM (standard cubic feet per minute) @ 90 psi (pounds per square inch) allows the compressor to recover quickly after its initial tank charge is exhausted. 78 dB (decibel) operational noise level for a quieter work environment. 10″ non-flat foam tires allow for easy transport. Efficient high pressure technology allows for longer pump and motor life. Oil-free, maintenance free pump for convenient use. Efficient high pressure motor allows the compressor to be run with an extension code (12 gauge or heavier, 50 ft. or less) due to consistent amp draw requirement of the compressor. High flow coupler allows for maximum nailer performance. Metal console panel provides a display area as well as protects the gauges, couplers, and regulator. High flow coupler allows for maximum nailer performance. 2″ gauges allow for an easy to read surface. 1 year limited . Vertical stand feature and collapsible handle allows user to save space by transporting or storing the compressor in a vertical position. This product is manufactured in United States. This product meets customer requirement.

Amazon.com

DEWALT built the D55146 Heavy Duty 4.5 Gallon, 225 PSI, Heavy Duty Hand Carry Compressor with Wheels is quiet, efficient and solidly built; constructed to withstand harsh jobsite conditions. Its dual connections allow users to simultaneously operate up to 3 framing nailers or 2 roofing nailers. This versatile compressor is useful to both small framing carpenters & remodelers and large trim carpenter crews & remodelers alike. The unique, patented high efficiency motor and high pressure pump provide a maximum pressure of 225 PSI with 5.0 SCFM @ 90 PSI so you never lose pressure. The D55146 is convenient, with an oil free, maintenance free pump and is easy to move & store with pneumatic wheels. It’s the perfect compressor to choose if you need a lot of power and a low maintenance tool.

See all Product description