We spent many hours on research to finding dewalt table saw manual, reading product features, product specifications for this guide. For those of you who wish to the best dewalt table saw manual, you should not miss this article. dewalt table saw manual coming in a variety of types but also different price range. The following is the top 10 dewalt table saw manual by our suggestions
704 reviews analysed
1. DEWALT DW788 1.3 Amp 20-Inch Variable-Speed Scroll Saw – Yellow
Feature
- Double parallel-link arm design dramatically reduces vibration and noise for extremely accurate cuts
- Exclusive tool-free blade clamps allow blade changes in seconds. Depth of Cut (inches): 2 in
- On-off switch, electronic variable speed, flexible dust blower, and blade-tensioning lever all located on front upper arm
- Arm design pivots from back of the saw to front, shortening the arm movement for smoother, quieter operation
- Arm lifts so blade can be easily threaded through the material for inside cuts
Description
Product Description
Double parallel link arm design dramatically reduces vibration and noise, for extremely accurate cuts. Exclusive tool-free blade clamps, On-off switch, electronic variable speed, flexible dust blower and blade-tensioning lever are all located on the front upper arm. Arm design pivots from the back of the saw to the front and lifts so blade can be easily threaded through the material for inside cuts. Unique arm design keeps the blade perpendicular to the work. Oversized, cast-iron table provides excellent material support and bevels 45 degrees left and right. Specs: Motor 1.3 amp rating, 120V AC. 400-1,750 cutting strokes per minute. Table size 16" x 23-3/4". Weighs 56 lbs. Meets OSHA standards, CSA approved and U.L. Listed. Stand Not Included . Featured length of the flexible shaft is approximately 22 inches long
Amazon.com
The dependable DEWALT 20-Inch Variable-Speed Scroll Saw is designed to help you create accurate, detailed workpieces with ease. Its user-friendly configuration with easy-to-access controls, reduced-vibration design, and variable-speed performance allow for incredible precision. For added convenience and durability, an integrated cast-iron table provides material support, and a flexible dust blower helps keep your work area pristine.
Unique Arm Design for Accurate Cuts
A scroll saw needs to perform both reliably and accurately, whether you’re crafting custom jigsaw puzzles or designing unique trim pieces. This DEWALT scroll saw’s double parallel-link arm design helps it deliver on both fronts by reducing vibration. The specially designed arm pivots from the back of the saw to the front, shortening the distance that the arm needs to move and allowing for smoother, quieter saw operation. With less vibration, you can produce accurate cuts with ease.
This unique arm design also works to keep the saw’s blade perpendicular to whatever you’re working on, reducing the chance of over cutting or under cutting.
Easy to Handle with Variable-Speed Control
Adding to the saw’s intuitive, design are convenient controls engineered by DEWALT to keep your workflow smooth. The saw’s on-off switch, speed control, and blade-tensioning lever are all located within easy reach on the front, upper arm. The saw’s flexible dust blower is also located on this portion of the arm so it can easily be directed where you need it, keeping your work surface clear of unwanted debris.
The scroll saw’s electronic variable-speed control allows you to make quick, accurate adjustments and utilize speeds ranging from 400 to 1,750 strokes per minute. The saw relies on a dependable 1.3 Amp motor for the power you need and delivers a variable stroke length between 3/4 inch and up to 2 inches deep. This application-specific performance translates to improved control and cleaner results.
Save Time with Tool-Free Blade Changes and Adjustable Table
Whether you’re working with a variety of specialty materials or you’re simply ready for a more aggressive cut, the DEWALT exclusive, tool-free blade clamps allow you to complete blade changes in just seconds. And the arm is easy to lift, making it easy to thread the blade through materials when making inside cuts.
Weighing 56 pounds, this scroll saw has a heavy-duty feel yet is small enough to move around the shop easily. The saw’s oversized, cast-iron table provides excellent support no matter what you’re working on, and the table bevels 45 degrees to the left and 45 degrees to the right for added versatility.
This 20-inch variable-speed scroll saw comes with a DEWALT warranty package that includes a three-year limited warranty, a one-year free service contract, and a 90-day money-back guarantee.
What’s in the Box
DEWALT 20-Inch Variable-Speed Scroll Saw, hex wrench, and blades.
2. DEWALT DCS571B Atomic 20V Max Brushless 4-1/2 in. Cordless Circular Saw (Tool Only)
Feature
- Brushless motor allows you to cut up to 339 linear feet of 3/4 in. Osb using DCB205 battery (sold separately)
- Removable auxiliary handle for increased control
- Hang hook for increased convenience
- On-board blade key storage for hassle free blade changes
- 1-1/2 in. Finger trigger allows users to choke-up on tool if necessary for their application
3. DEWALT DCS391P1 20V MAX Lithium Ion Circular Saw Kit
Feature
- Kit
- Imported
- Powerful 5,250 rpm motor delivers power and speed to make the most demanding cuts with ease
- High strength and lightweight magnesium shoe provides jobsite durability for long-term cut accuracy
- Optimized rubber overmolded comfort grip
- 20V MAX Lithium Ion 5.0 AH battery
- 0°-50° bevel capacity allows for aggressive bevel cuts for a multitude of applications
Description
The DEWALT DCS391P1 20V MAX Lithium Ion Circular Saw Kit features a powerful 5250 rpm motor that delivers power and speed to make the most demanding cuts with ease. A high strength and lightweight magnesium shoe provides jobsite durability for long-term cut accuracy, and the optimized rubber overmolded comfort grip delivers optimal balance and control. 0Degree-50Degree bevel capacity allows for aggressive bevel cuts for a multitude of applications, along with a 6-1/2″ carbide tipped blade for cutting 2x material at 90Degree and 45Degree and more cuts per charge. This saw is powered by a 20V MAX Lithium Ion 5.0 AH battery. No Load Speed: 5250 rpm, Depth of Cut at 45Degree: 1-5/8″, Depth of Cut at 90Degree: 2-/4″. Kit includes: (1) DCS391 6-1/2″ Circular Saw, (1) DCB205: 20V MAX XR Premium Li-Ion Battery (5.0 Ah), Fast Charger, 6-1/2″ Carbide-tipped Blade, and Kit Box.
4. DWS535B 7-1/4", Worm Drive Circular Saw with Brake
Description
7-1/4” worm drive Circular saw with brake is manufactured with a durable, magnesium construction ensuring optimum user handling, comfort and strength plus a cast magnesium footplate providing a tough, solid cutting platform. Features an extra wide saw hook accepting material up to 2-1/2” wide, cord protection system delivering four times better cord jerk protection and a top accessible Spindle Lock enabling easier and quicker blade changing. Offers a 53 degree bevel capacity for advanced applications and detents at 22.5 degrees and 45 degrees allowing for fast, accurate settings to common angles. Product includes a carbide Tipped 7-1/4” 18T blade and blade wrench.
5. DEWALT DCS570B7-1/4" (184mm) 20V Cordless Circular Saw with Brake (Tool Only)
Feature
- Power – Brushless motor provides 5200Rpm and maintains speed under load
- Runtime – 100 cross cuts in a 2×4 (Pine)
- Capacity – 7-1/4″ blade provides 2-9/16″ depth of cut
- Ease of use – bevel capacity up to 57 degrees
- Battery not included
- Battery & Charger Sold Separately
- *Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18
Description
The DEWALT DCS570B 7-1/4″ (184mm) 20V cordless Circular saw with brake (baretool) features a Brushless motor that provides 5200 RPM and maintains speed under load. It uses a 7-1/4″ blade, that provides 2-9/16″ depth of cut, with a bevel capacity of 57 degrees. This Circ saw offers up to 100 cross cuts in pine. This is a baretool item – battery sold separately. Specs: top handle, 5200 RPM, Brushless motor, depth of cut at 45° = 1-5/8 inches, depth of cut at 90° = 2-9/16 inches, 2 bevel stops, rear pivot, Electric brake, max watts out = 900 watts. Includes: 1) 7-1/4″ (184mm) Circular saw, 1) 7-1/4″ (184mm) blade, 1) blade changing wrench.
6. DEWALT DCP580B 20V Max Brushless Planer (Bare Tool)
Feature
- Brushless motor which provides power and runtime of 32,000 cuts per minute
- Calibrated depth adjustment knob to 5/64″ (2 mm approximately) and no load speed is 15000 rpm
- Precision-machined front and back aluminum shoes ensure parallelism of cut
- Kickstand allows user to rest the planer on work surface without gouging the material
- Poly-V drive belt provides increased belt durability
- Battery & Charger Sold Separately
Description
The DEWALT DCP580B 20V MAX* Brushless Planer features a brushless motor which provides power and runtime of 32,000 cuts per minute and can achieve a fast removal rate with 5/64″ (2 mm approximately) maximum depth of cut. This tool offers a calibrated depth adjustment knob to 5/64″ (2 mm approximately). The precision-machined front and back aluminum shoes ensure parallelism of cut and the kickstand allows user to rest the planer on work surface without gouging the material. A precision machined groove in the front shoe allows for edge chamfering. A Poly-V drive belt provides increased belt durability and an ergonomically designed handle provides greater comfort and less user fatigue. Includes: Planer, Users Guide, Guide Fence, Wrench.
7. DEWALT DWE575SB 7-1/4-Inch Lightweight Circular Saw with Electric Brake
Feature
- Lightweight and compact 15A (Ampere) saw delivers power for the toughest applications
- This product is manufactured in China
- This product meets customer requirement
- Lightweight and compact 8.8-Pound
- Electric Brake
- Patented 15-Amp motor
- 57-Degree beveling capacity with positive stops at 45-Degree and 22.5-Degree
- Integrated Dust blower
Description
The Dewalt DWE575SB 7-1/4-inch lightweight circular saw with electric brake is designed to be one of the lightest and well balanced saw in its class at only 8.8 pounds, with an electric brake that stops the blade after the trigger is released. A ball bearing lower guard provides a durable design — even against dust contamination for smooth retraction — along with the high grade stamped aluminum shoe that provides the user with a durable and smooth base for accurate cutting. Advanced lower guard geometry for bevel cuts with integrated dust blower allows the user to clear the sightline while cutting. A patented tough cord protection system provides 3x durability against cord pull-out. On-board blade wrench storage allows for easy storage and convenience for blade changes. It also includes a handy carrying case for easy portability.
Small but Powerful
Weighing only 8.8 pounds and measuring 7.2 inches in width, the DWE575SB is one of the lightest circular saws in its class. Despite its small size, the unit delivers plenty of power to perform some of the most demanding applications with 1,950 Max Watts Out (MWO) and 5,100 revolutions per minute (RPM). The saw is ideal for framers, concrete formers, general contractors, and remodelers who are tasked with completing applications ranging from framing walls to cutting plywood, siding, exterior finishing, and more. Also, thanks to an integrated dust blower that cleans the user’s line of sight before cutting and high quality gears, the saw provides smooth cutting, high quality performance. The saw also features a 57-degree bevel capacity, with 22.5- and 45-degree detents, and a 2 9/16-inch depth of cut capacity, which is best in class and allows for a variety of applications.
Tough and Durable
To provide durability, DEWALT incorporated several features into the design of the new circular saw. For instance, a ToughCord cord system provides three times more resistance to cord pullouts when compared to circular saws without a ToughCord system. To aid in comfort and balance, the new circular saw features ergonomic handles and trigger actuation. The DWE575SB also features an electric break that allows for the saw blade to stop after two to three seconds from the time the trigger is released, providing additional safety. This feature allows users to start repetitive cuts faster.
What’s in the Box
7-1/4 inch circular saw, blade wrench, carbide-tipped 7-1/4 inch circular saw blade, user instruction manual, contractor bag.
Key Specifications
- Amps: 15 amps
- Max Watts Out: 1950 watts
- No Load Speed: 5200 rpm
- Bevel Capacity: 57 degrees
- Bevel Stops: 22.5 and 45 degrees
- Electric Brake: Yes
- Rear Pivot: No
- Blade Diameter: 7-1/4 inches
- Depth of Cut at 90 degrees: 2.55 inches
- Depth of Cut at 45 degrees: 1.9 inches
- Tool Weight: 8.8 pounds
8. DEWALT DW7880 Scroll-Saw Stand
Description
Amazon.com
This DEWALT scroll stand is a great accessory to have when you don’t have a lot of work bench space and you’re looking for a sold surface for you DEWALT DW788 scroll saw. Ruggedly crafted with holes at the base so you can bolt the stand to the floor, this stand is built to last in even heavy duty applications. It’s built from all metal can be simply orientated to the height you need with the rear adjustable legs.
From the Manufacturer
DEWALT DW7880 Scroll Saw Stand
9. DEWALT DW7350 Planer Stand with Integrated Mobile Base
Description
Amazon.com
Provide dependable support for your planer while keeping it mobile using the DeWalt DW7350 Planer Stand with Integrated Base. This set-up features strong, reliable, heavy-gauge steel brackets that are capable of supporting even the bulkiest bench top planers, and a medium-density fiberboard top that is predrilled for easy installation of any DeWalt planer. If your planer doesn’t line up with the existing holes, it’s easy to drill new holes to accommodate it. Perhaps the most innovative feature of this set-up is the wheel set, which can be engaged or disengaged using a foot pedal for instant portability or secure work.
From the Manufacturer
DEWALT DW7350 Planer Stand with Integrated Mobile Base
10. DEWALT DWE7491RS 10-Inch Jobsite Table Saw with 32-1/2-Inch Rip Capacity and Rolling Standw/ DW3106P5 60-Tooth Crosscutting and 32-Tooth General Purpose 10-Inch Saw Blade Combo Pack
Feature
- Rack & Pinion Fence System Make fence adjustments fast, smooth and accurate
- 32-1/2″ Rip capacity easily cuts a variety of larger shelving and trim materials
- 2-1/2-Inch Dust Collection Port easily connects to a vacuum for efficient dust extraction
- Tougher tungsten carbide stays sharper longer
- Computer-balanced plate reduces vibration for improved accuracy and better finish
- Best used for miter saw and slide miter saw jobs
Conclusion
By our suggestions above, we hope that you can found Dewalt Table Saw Manual for you.Please don’t forget to share your experience by comment in this post. Thank you!