Nowadays, there are so many products of honeywell wired carbon monoxide detector in the market and you are wondering to choose a best one.You have searched for honeywell wired carbon monoxide detector in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings honeywell wired carbon monoxide detector which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
546 reviews analysed
1. SYSTEM SENSOR CO1224T 12/24 volt, 4-wire, system-monitored C02 carbon monoxide detector w/ RealTest Technology
Feature
- The System Sensor CO1224T CO detector provides early warning of dangerous carbon monoxide levels by using electrochemical sensing technology to measure levels in the air.
- RealTest allows installers to test the detector with a short spray of CO gas.
- Full compliance with UL 2075, A six-year end-of-life timer
- A trouble relay requireby code, 12/24 VDC operation
- Wiring supervision with SEMS terminals
Description
‘ Carbon Monoxide Detector, Signaling Device, Finish White, Single Gang Box Mounting, Alarm Current 40mA, Peak Output 85 dBA, Height 6 In., Length 6 In., Width 6 In., Ambient Temp. Limits 32 to 104 F, Alarm Aux. Contact @ 30VDC 0.5 A, Humidity Range 22 to 90 % RH, Standby State 20 mA, Voltage 12/24 VDC, Standards UL, Includes Pendant Mount, For Use With Alarm Control Panels ‘
2. 5800COMBO Wireless Combination Photoelectric Smoke/Carbon Monoxide (CO) Detector for use with Honeywell’s 5800 Series
3. Honeywell Ademco 5800CO Wireless CO Detector
4. Honeywell SiX Two-Way Wireless Technology Smoke Detector
5. Honeywell – 5193SD – Smoke Detector, Photo, Vplex
6. Kidde Battery Operated Carbon Monoxide Alarm with Digital Display KN-Copp-B-LPM
Feature
- Digital Display – Displays the level of carbon monoxide the unit is sensing. Shows CO level in PPM (parts per million). Updates digital reading every 15 seconds allowing you to see if levels change. Peak Level Memory displays the highest CO concentration measured since the last reset
- Battery Operated – Provides best protection during power outages. Battery Safeguard makes it difficult to close the cover without batteries in the unit. Low Battery Signal alerts user when the batteries need to be replaced. Slide-Out Battery Door Cover gives immediate access to batteries
- Test/Reset Button – Tests unit’s electronic circuitry & horn and resets the unit during alarm. Tests CO alarm circuit operation and allows you to immediately silence the alarm
- LED’s – Green LED for normal operation, Red LED for alarm. Temperature range 40˚F (4.4˚C) to 100˚F (37.8˚C)
- Provides peace of mind against the silent killer and a digital display
Description
Product Description
The Kidde KN-COPP-B-LPM battery operated CO alarm provides continuous monitoring of CO levels, even during power outages when many CO incidents occur. The digital display feature allows for easy viewing of carbon monoxide levels from 30-999 PPM (parts per million). The KN-COPP-B-LPM will also detect and store concentration CO levels as low as 11 and up to 999 PPM with its peak level memory display. This alarm includes a slide-out battery door that gives immediate access to the batteries and a safety feature that makes it difficult to close the cover without the batteries being installed. It has a 10-year life and a 10-year limited warranty.
Amazon.com
Kidde’s KN-COPP-LPM battery-operated carbon monoxide alarm with digital display helps to provide your home with extensive protection against the dangerous threat posed by the odorless and colorless gas. With an increasing number of state and local governments passing legislation requiring CO detectors in homes, it’s never been a better time to safeguard your family against carbon monoxide exposure.
|
Kidde’s KN-COPP-LPM carbon monoxide detector is a free-standing unit, adding flexibility to placement around your home. View larger |
Features
The KN-COPP-LPM is an essential device to help warn you and your family of dangerous carbon monoxide levels in your home. This alarm measures the exposure to carbon monoxide over time; it is designed to sound at 85 decibels at 10 feet when it detects 70 ppm (parts per million) of CO for 60 to 240 minutes, 150 ppm for 10 to 50 minutes, or 400 ppm for 4 to 15 minutes. The easily visible digital display indicates the level of CO that the unit is sensing, and it updates the status every 15 seconds for timely and accurate readings. Its free-standing design allows for attachment to a wall or placement on a counter or nightstand for convenient and comprehensive protection. The KN-COPP-LPM also includes a slide-out battery door that provides immediate access to the power source as well as a battery safeguard that makes it difficult to close the cover without batteries installed. An LED lighting system on the unit signals power levels and sourcing: the green LED will flash once every 30 seconds to indicate the alarm is operating properly when power is present, and the red LED will pulse to indicate carbon monoxide has been detected until the device is reset or the CO threat is eliminated. This device has an expected 7-year lifespan and comes equipped with a five-year manufacturer’s limited warranty.
What’s in the Box
One Kidde KN-COPP-LPM battery-operated carbon monoxide alarm with digital display and three AA batteries.
The KN-COPP-LPM features an easy-to-read digital display in front and an easy-access door to the batteries in back. (Click each to enlarge) |
7. Kidde Worry-Free Carbon Monoxide Detector Alarm with 10 Year Sealed Battery | Model C3010
Description
Product Description
Kidde Worry-Free, 10 Year, Sealed Battery, Carbon Monoxide Alarm, Uses Electro-Chemical Sensing Technology To Protect Families, No Battery Replacement Required Over The 10 Year Life Of The Alarm, Alarm Automatically Activates When Attached To The Mounting Bracket, Tests/Reset Button, Green LED Light Indicates Alarm Is Operating Properly, Red LED Light Indicates Dangerous Levels & Alarm Will Sound End Of Life Warning, UL Listed, 10 Year Warranty, Clam Shell. This product adds a great value. Product is highly durable and very easy to use. This product is manufactured in China.
Amazon.com
Kidde Worry-Free Non-Digital Carbon Monoxide Alarm
Kidde Worry-Free carbon monoxide (CO) alarms offer 10 years of continuous detection from the leading cause of accidental poisoning deaths in America – carbon monoxide. The UL-listed alarms are the first and only models to contain a 10-year sensor as well as a sealed-in lithium battery proven to power the alarm for a decade. These two state-of-the-art technologies combine to create a premier level of protection. Homeowners have peace of mind knowing their CO alarm is always on, and they never have to be hassled by low-battery chirps or battery replacement. Until now, a CO sensor operated for five to seven years, based on the manufacturer. The Worry-Free alarms last nearly twice as long as the average model.
Long-Life Sealed Lithium Battery: Why It’s Needed
Each year, fire departments respond to an average of 72,000 CO poisoning incidents, according to the National Fire Protection Association. Known as the ‘silent killer,’ carbon monoxide is odorless, tasteless and invisible. The only safe way to detect it is with a working CO alarm. Industry surveys find approximately half of U.S. homes have a carbon monoxide alarm installed, most of those are battery-operated. A recent survey conducted on behalf of Kidde, found homeowners’ number one fire safety complaint is a low battery chirp.
Worry Free Benefits
The C3010 carbon monoxide detection unit provides one decade of protection; the sealed lithium batter provides 10 years of continuous power. It is also both maintenance-free and hassle-free; never replace a battery during the alarm’s operating life and no need to worry about the batteries being removed. Additionally, this Worry Free unit is the longest sensor life available and is proven effective for ten years with quick and easy installation by simply sliding the alarm onto the mounted bracket which activates it automatically.
What’s in the box
One single Kidde Worry-Free Non-Digital Carbon Monoxide Alarm. A ten-year limited warranty.
Specifications
- UL Listed – tested by an independent nonprofit testing agency to ensure it meets the US standard
- 85 decibel alarm – loud enough to wake the average sleeping adult
- Nighthawk electro-chemical sensor, which is proven to be the world’s most accurate based on claims by major manufacturers
- Test-Reset Button tests the alarm circuitry and horn, resets memory after alarm has sounded
- End-of-life signal chirps every 30-45 seconds when alarm needs to be replaced – approximately 10 years after power
- Deactivation switch disables the alarm and makes the batteries safe for disposal once the unit has reached the end of its 10-year life
- Tamper resistant feature prohibits a disabled alarm from being placed back onto the mounting bracket
- 10-Year Limited Warranty lasts the life of the alarm
8. Kidde Worry-Free 120V Hardwired Smoke & Carbon Monoxide Detector Alarm with Lithium Battery Backup | Model I12010SCO
Feature
- Provides Protection from Two Hazards – Fire and CO in one unit with 10-year sealed lithium battery backup.
- Sealed-In Lithium Battery Backup – No battery replacement required over the 10 year life of the alarm. Eliminates worry about removal or unauthorized deactivation of alarm.
- Voice Warning System – Verbally announces “FIRE!” or “WARNING! CARBON MONOXIDE” to help distinguish between threats. Audio Alarm: 85 dB at 10 feet
- Ionization Sensing Technology – Ideal for detecting fast flaming and other types of fires. Temperature Range : 40 degree F (4.4 degree C) to 100 degree F (37.8 degree C)
- Hush Feature – Temporarily silences nuisance alarms for approximately 9 minutes and will not allow hush mode unless the unit is in alarm mode.Interconnects – Up to 24 Kidde devices (of which 18 can be initiating).Flashes once every 60 seconds to indicate battery only mode
Description
The Kidde i12010SCO is a hardwired combination smoke and carbon monoxide alarm that contains a 10-year, sealed battery backup. This alarm uses breakthrough technology to offer a fast response to real fires, including smoldering and fast-flaming, as well as protect you from carbon monoxide and dramatically reduce the chance of nuisance alarms. The Intelligent sensor technology combines the detection capabilities of an ionization smoke sensor – which is more likely to detect smaller, less visible fire particles, like those produced by flaming fires – with that of an electrochemical sensor, which is used to detect CO. Since carbon monoxide is present in all fires, having both detection chambers work together in one alarm is a breakthrough in the fire safety industry. When either sensor notices a potential hazard, it will communicate with the other. Depending on what is detected, the alarm will adjust its smoke sensitivity in order to better discriminate between a real hazard and a false one. This constant communication enhances the alarm’s overall performance in all fires, and significantly reduces the potential for a nuisance alarm. Peak Level Memory-Announces “CARBON MONOXIDE PREVIOUSLY DETECTED” if alarm has detected CO level of 100ppm or higher since it was last reset. Humidity Range – 10%-85% non-condensing relative humidity (RH)
9. Kidde Carbon Monoxide Alarm
Feature
- Peak Level Button – Displays the peak CO level recorded by the alarm since it was last reset or unplugged
- Test Button Functions – Tests the unit for proper operation and resets the Carbon Monoxide alarm
- LED Operation – Blinking dot in lower right corner of display denotes normal operation
- Ten years after the initial power up, this alarm will “beep” two times every 30 seconds to indicate that it is time to replace the alarm.
- NOTE: This CO alarm is not battery operated. However, these alarms are equipped with 9 volt battery backup – the 9 volt battery is to supply short term back-up during a power outage.
Description
Product Description
Digital Display – Displays the level of carbon monoxide the unit is sensing. The unit updates this reading every 15 seconds
Amazon.com
Protect your family from the dangers of carbon monoxide (CO) exposure with the Kidde KN-COPP-3 Nighthawk Plug-In Carbon Monoxide Alarm with Battery Backup and Digital Display. The Nighthawk is an easy-to-install unit that provides reliable protection against the dangers of CO. It features a digital display that shows CO levels in parts per million allowing you to see if, how, and when levels change.
|
This discreet alarm is designed to fit into any standard A/C outlet in your house. View larger. |
The easy-read digital display updates every 15 seconds to indicate any abrupt changes or alarming trends in CO levels. View larger. |
Advanced Technology in an Easy-to-Install, Plug-In Design
Designed for home use, the Kidde KN-COPP-3 Nighthawk is a UL-listed, A/C-powered, plug-in CO alarm that utilizes sophisticated electronic components and sensor technology to protect you and your family from the dangers of CO. It plugs directly into a standard A/C outlet and includes a 9-volt battery backup that provides continuous monitoring of CO levels–even during power outages.
About Carbon Monoxide: The Silent Killer
The leading cause of accidental poisoning deaths in North America, carbon monoxide (CO) is often referred to as the silent killer because it’s odorless, tasteless, and invisible. Carbon monoxide poisoning can come about via a number of sources, including everyday items and appliances in your home or office. And because symptoms of CO poisoning mimic the flu or other common illnesses it can often go undiagnosed.
Audible Alarm Pattern Alerts you to Elevated CO Levels
When placed on every level of your home, alarms like the KN-COPP-3 Nighthawk can help protect everyone in the house from CO exposure by giving you an unmistakable signal when levels have reached an unhealthy point. If unhealthy levels are detected, the alarm will emit four quick audible beats every five seconds until either levels decrease or the reset button is pressed.
Easy-to-Read Digital Display Shows CO Levels
The KN-COPP-3 Nighthawk is unique among traditional CO alarms because of its digital display. This display clearly shows levels of CO that the unit has detected and stored– from 30 to 999 ppm–and it updates every 15 seconds to indicate any abrupt changes or alarming trends. The display also shows the peak CO level recorded by the alarm since it was last reset or unplugged.
LED Shows Sensor Status
With the KN-COPP-3 Nighthawk, you never have to wonder if the sensor is functioning properly. A blinking dot in the lower right-hand corner of the display denotes normal operation, so you can trust that it’s working. In addition, you can test alarm function by pressing the test/reset button at any time to verify that the horn and electric circuitry are operating properly.
Convenient Mounting Options
The KN-COPP-3 Nighthawk has a low-profile design that makes it suitable for any room in your home. The detector can be plugged into any standard A/C outlet; it’s plug can be snapped into the back of the unit and can be rotated so the alarm remains vertical, independent of whether the electrical socket is mounted vertically or horizontally. In addition, the alarm comes with a 6-foot extension cord, so the unit can be plugged into the wall outlet and then placed on a table or shelf. For the most thorough protection, place an alarm on every level of your home.
The UL-listed Kidde KN-COPP-3 Nighthawk has a seven-year life and is backed by a five-year limited warranty.
About Kidde: A UTC Fire and Security Brand
Renowned for global leadership in fire detection and suppression, Kidde provides solutions ranging from portable fire extinguishers to advanced industrial controls such as flame detection and explosion suppression systems. Kidde is a UTC Fire and Security brand, with a history that’s rich with innovations, from the patent of the Chubb Detector Lock in 1818 to the development of the world’s first wireless networked smoke detectors in 2004.
What’s in the Box
Kidde KN-COPP-3 Nighthawk CO Alarm, 9-volt battery, mounting hardware, and installation guide.
Keep your family safe by placing alarms and extinguishers in each area of the house, and by having a fire escape plan. Click here for a detailed image. |
10. Kidde 21006406 KN-COB-IC Hardwire Carbon Monoxide Alarm with Battery Backup, Interconnectable
Feature
- Battery Pull Tab – Eliminates battery installation time and keeps battery fresh.
- Quick Connect –Installs quickly with snap-on harness.
- Sealed Cover –Reduces nuisance alarms. Sealed to protect sensor from contaminants prior to installation.
- Alkaline Battery Backup – for continuous protection in case of power failure.
- Test/Reset – Tests CO alarm circuit operation and allows you to immediately silence the alarm.
- IMPORTANT: This carbon monoxide alarm is designed to detect carbon monoxide from ANY source of combustion. It is NOT designed to detect smoke, fire, or any other gas
- CAUTION: Kidde (Fyrnetics/Lifesaver/Kidde/Nighthawk/Pyrene) alarms and accessories can only be interconnected with other Kidde alarms and accessories
Description
Product Description
The Kidde 900-0120 Is An Ac Wire-In Carbon Monoxide Alarm That Warns You And Your Family Of Dangerous Carbon Monoxide Levels. It Includes Multiple Contractor Friendly Features To Ensure Easy Installation And Minimal Troubleshooting. This Alarm Interconnects With Up To 24 Kidde Devices (Of Which 18 Can Be Initiation) Including Smoke Alarms, Co Alarms And Heat Alarms On One Wiring Network. The 900-0120 Includes A 9V Battery Backup Along With A 5-Year Limited Warranty. Battery Pull Tab Made in: United States Dimensions: 2.4 X 6 X 5.9Brand: Kidde Item Weight: 0.93includes: Unit Instruction Guide
Amazon.com
Kidde’s KN-COB-IC hardwire carbon monoxide interconnectable alarm with battery backup helps to provide your home with comprehensive protection against the dangerous threat posed by the odorless and colorless gas. With an increasing number of state and local governments passing legislation requiring CO detectors in homes, it’s never been a better time to safeguard your family against carbon monoxide exposure.
|
Kidde’s KN-COB-IC hardwire carbon monoxide alarm with battery backup is interconnectable with 23 other devices for comprehensive coverage. View larger |
Features
The KN-COB-IC is an essential device to help warn you and your family of dangerous carbon monoxide levels in your home. This alarm measures the exposure to carbon monoxide over time; it is designed to sound at 85 decibels at 10 feet when it detects 70 ppm (parts per million) of CO for 60 to 240 minutes, 150 ppm for 10 to 50 minutes, or 400 ppm for 4 to 15 minutes. The added benefit of being able to interconnect this unit with up to 23 other Kidde devices—such as other CO alarms, smoke detectors, and heat sensors—all on one wiring network delivers extensive protection against fire and carbon monoxide (as well as peace of mind). The 9-volt battery backup provides continuous security if the power goes out. An LED lighting system on the unit signals power levels and sourcing: The green LED is steadily on when AC power is present and will flash every 7 seconds when in battery-only mode; the red LED will flash in unison with the sounder pattern for both a smoke or CO incident, and it will flash once per 30 seconds if the alarm needs service or be steadily on if the alarm is in error mode; and the amber LED will illuminate if the unit is the originating alarm in a CO incident. This device has an expected 7-year lifespan and comes equipped with a 5-year manufacturer’s limited warranty.
What’s in the Box
One Kidde KN-COB-IC hardwire carbon monoxide interconnectable alarm with battery backup.
The KN-COB-IC’s many user-friendly features make it easy to install and maintain. (Click to enlarge) |
Conclusion
By our suggestions above, we hope that you can found Honeywell Wired Carbon Monoxide Detector for you.Please don’t forget to share your experience by comment in this post. Thank you!