Nowadays, there are so many products of makita demolition hammer bits in the market and you are wondering to choose a best one.You have searched for makita demolition hammer bits in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings makita demolition hammer bits which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
548 reviews analysed
1. Makita HM1211B 20-Pound Demolition Hammer
Feature
- Powerful 10.0 AMP motor delivers 2,000 BPM for the most demanding applications
- Comfortable rubber D-shaped grip side handle absorbs vibration
- secures in four positions for operator convenience in any position
- One-touch latch bit retainer for quick bit changes
- AC/DC switch for use with alternative power source
- Makita Motor Advantage engineered with field core interlocking steel laminations, dual ball bearing armature and more copper commutator bars, increasing energy transfer efficiency for more power and longer tool life
- Automatic brush cut-off protects commutator from damage for longer tool life
- Factory grease packed for reduced maintenance
- Accepts 3/4″” Hex Shank bits
- Hex Wrench #4 (783202-0)
- Hex Wrench #8
- Tool Case
- HM1214CX
- HM1307CB
- HM1203C
- HM0870C
- HM1317CB
- HM1214C
- HM1500B
- HM1100C
- HM0810B
- 20-pound demolition hammer with 10 Amp motor
- Accepts commonly used 3/4-inch steel
- Rubber grip side handles absorb vibration
- can be secured in 4 positions
- Includes demolition hammer, hex wrench, and plastic tool case
- Measures 19-5/16-by-5-11/16-by-9-13/16 inches (LxWxH)
- 1-year limited warranty
Description
Product description
Makita HM1211B 20 lb. Demolition Hammer (AC/DC)Makita owes its reputation for building outstanding quality power tools to the drive and determination for excellence that began over 85 years ago as a manufacturer of electric motors. In 1958, Makita introduced their first electric tool and today Makita is one of the world’s largest power tool manufacturers.Makita HM1211B 20 lb. Demolition Hammer (AC/DC) Features: Air Cushion Design for Powerful Performance Accepts commonly used 3/4″ steel Powerful 10 AMP motor (2,000 BPM) for fast and efficient operation Comfortable rubber D-shaped grip side handle absorbs vibration; secures in four positions for operator convenience in any position One touch latch bit retainer for quick bit changes Automatic brush cut-out when periodic servicing is due Factory grease packed for reduced maintenanceMakita HM1211B 20 lb. Demolition Hammer (AC/DC) Specifications: Blows/min.(BPM) 2,000 Impact Energy 14.2 AMPS 10.0 Bit type 3/4″ Hex Length 19-5/16″ Net Weight (lbs.) 20.7 Shipping Weight (lbs.) 33.0 Includes: Hex wrench (#4; 783202-0, #8; 783210-1) Plastic tool case (150589-9)
Amazon.com
The Makita 20-pound demolition hammer features a powerful 10 Amp motor that provides fast and efficient operation. For user comfort and convenience, the rubber grip side handles absorb vibration and can be secured in four positions. This tool has been factory grease packed for reduced maintenance and it has an automatic brush cut-out when periodic servicing is due. It accepts commonly used 3/4-inch steel and measures 19-5/16-by-5-11/16-by-9-13/16 inches (length by width by height) and is backed by a one-year warranty.
What’s in the Box
Demolition hammer, hex wrench, and plastic tool case.
2. Bosch HS2164 20 In. 3 In. Chisel 1-1/8 In. Hex Hammer Steel
3. Makita 751622-A 5-1/2" x 20" Clay Spade, 1-1/8" Hex
Feature
- For digging in clay, shale, hard packed gravel, loose concrete and dirt
- Manufactured using state-of-the-art technology, CNC machined and forged from industrial-grade alloy material for increased durability
- Shot peened for added strength and increased surface hardness
- Clear-coat helps prevent corrosion,
- Makita 5-1/2” x 20” Clay Spade, With a 1-1/8” Hex Shank (751622-A), Fits Breaker Hammers that accept 1-1/8” hex demolition steel, Fits Makita HM1810 and HM1812 among others
4. Makita 3 Piece – SDS-Plus Chisel & Bull Point Bit Set for SDS+ Rotary Hammers – Aggressive Demolition for Concrete & Tile – Carbide Tipped Bits
Feature
- ✅ Makita’s 3-Piece SDS-Plus DEMOLITION BIT Set for SDS+ Rotary Hammers with dedicated 3 Premium, Long-Lasting, Heavy-Duty, Tungsten Carbide Point, Flat Chisel & Scaling Chisel for EASY Demolition into all your Masonry, Concrete, Brick, Tile & Cinder Block applications
- ✅ 3 Piece SDS+ Set includes Common diameters: 1 Point Bit of 10″ + 1 Flat Chisel Bit of 10” x 3/4″ + 1 Scaling Chisel Bit of 10″ x 1.56” | Engineered in Japan for optimal use with Makita SDS-Plus Rotary Hammer while also fully compatible with All SDS-Plus Rotary Hammers
- ✅ EASILY Demolish concrete, brick, and masonry LONGER & MORE PRECISELY with Makita’s HARDENED, Single, Cold-Steel Piece Bits with industry-leading Tungsten Carbide & Steel Bit Integrity for unmatched LONG LIFE, SAFE Chiseling & RELIABLE Demolition | Each Premium Makita bit is uniquely forged and heat-treated, designed for chipping, scaling and large area surface removal
- ✅ AVOID LOWER PRICED & lower quality Chisel and Bull Point bits that prematurely wear and strain the powertool, resulting in high bit consumption rate, project completion delays, ineffective demolishing and making the overall chiseling much more difficult | Makita’s Single-Piece Chisels are heat-treated and forged for unmatched STRENGTH and LONGEVITY, with its sharp edge design for MAXIMUM masonry impact
- ✅ Makita’s Bull Point Chisel demolishes and starts holes in concrete slabs, brick, mortar, slate, masonry, and all different types of stones | Makita’s Flat Chisel edges, chips, scales or channels concrete, stone, masonry and brick | Makita’s Scaling Chisel removes scale, rust, concrete, masonry, brick, stone and weld spatter or removes LARGE quantities of material
5. Bosch HS2161 20 In. Moil Point 1-1/8 In. Hex Hammer Steel
6. Makita HM1307CB 35-Pound Demolition Hammer
Feature
- Power Tools and Accessories
- Country of manufacture: Japan
- Manufacturer: Makita
- Electronic Speed Control – Automatically applies additional power to the motor to maintain consistent speed under load for the most challenging jobs
- Soft Start – Suppresses start-up reaction for more control and better accuracy
- Variable Speed – variable speed control dial that enables user to match the speed to the application for greater versatility
- Makita Motor Advantage – field core interlocking steel laminations, dual ball bearing armature, large surface commutator, resulting in the most efficient transfer of energy for greater power
- Automatic brush cut-off system protects commutator for longer tool life
7. TR Industrial Point and Flat Concrete Chisels for Electric Demolition Jack Hammer
Feature
- Designed to drill through concrete, dig up clay for backyard & garden landscaping
- Fit TR Industrial jack hammer ASIN: B00TUJMJNI and B002VN6TDG
- 16-in long point and flat chisel set for TR Industrial jack hammer
- Point and flat chisel set for breaking up concrete and more
- Replacement bits for electric demolition jack hammer
Description
16-in long point and flat chisel set for TR Industrial jack hammer Replacement bits for electric demolition jack hammer Point and flat chisel set for breaking up concrete and more TR Industrial 2-piece replacement point and flat chisel bit for electric jack hammer. Solid steel construction for breaking up concrete, rocks and others.
8. Makita B-45559 16" Self Sharpening Bull Point with 1-1/8" Hex
Description
The new Makita 16″ Self-Sharpening Bull Point for 1-1/8″ Hammers features an innovative design engineered to keep the bit point sharp longer than traditional bits.
9. Makita 1 Piece – SDS-Max 3" Scaling Chisel Bit For SDS Max Rotary Hammers – Easy Removal of Tile, Concrete & Masonry
Feature
- ✅ Makita’s 1-Piece SDS-MAX SCALING CHISEL BIT for SDS MAX Rotary Hammer Drills an Ultra-Duty, Long-Lasting, Tungsten Carbide Scaling Chisel for EASY Demolition into all your Heavily Reinforced Masonry, Concrete, Brick, Tile & Cinder Block applications
- ✅ 1 SDS-Max Scaling Chisel Bit is 12″ Long by x 3” Wide | Engineered in Japan for optimal use with Makita SDS-Max Rotary Hammer while also fully compatible with All SDS-MAX Rotary Hammers
- ✅ EASILY Demolish concrete, brick, and masonry LONGER & MORE PRECISELY with Makita’s HARDENED, Single, Cold-Steel Piece Bits with industry-leading Tungsten Carbide & Steel Bit Integrity for unmatched LONG LIFE, SAFE Chiseling & RELIABLE Demolition | Each Premium Makita bit is uniquely forged and heat-treated, designed for chipping, scaling and large area surface removal
- ✅ AVOID LOWER PRICED & lower quality Chisel bits that prematurely wear and strain the powertool, resulting in high bit consumption rate, project completion delays, ineffective demolishing and making the overall chiseling much more difficult | Makita’s Single-Piece Chisels are heat-treated and forged for unmatched STRENGTH and LONGEVITY, with its sharp edge design for MAXIMUM masonry impact
- ✅ Makita’s SDS-Max Scaling Chisel removes Ultra-Duty scale, rust, concrete, masonry, brick, stone and weld spatter & removes LARGE quantities of material
Description
Hardened, cold steel forged SDS-Max Scaling Chisel Set provide unmatched DURABILITY, PERFORMANCE AND RELIABILITY for concrete and masonry demolition and surface conditioning. Includes a Heavy-Duty Metal Case for safekeeping and easy storage.
Conclusion
By our suggestions above, we hope that you can found Makita Demolition Hammer Bits for you.Please don’t forget to share your experience by comment in this post. Thank you!
