Finding your suitable readers for memphis 4 channel amp is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for memphis 4 channel amp including detail information and customer reviews. Let’s find out which is your favorite one.
758 reviews analysed
1. Kenwood 1177524 Compact Automotive/Marine Amplifier Class D Kac-M1824BT, 180W RMS, 400W PMPO, 4 Channel
Description
With today’s smartphones hosting a wide variety of listening choices such as stored music, internet radio, podcasts, etc., It is no wonder that customers want to use this as their primary listening source. Bluetooth offers the easiest and most popular connection, kac-m1824bt is not only your standalone Bluetooth gateway but if used with an in-dash receiver, it will double the power of a typical CD receiver with it’s built-in 45watts x 4 of amplification. A water resistant controller can be used to adjust volume and change tracks. Many of today’s power sports have very limited space to work in and tend to be a harsh environment for electronics because of the exposure to outdoor environments. Kenwood’s compact performance amplifiers are small in size so they fit even the most limited installation areas. The amplifiers also use a conformal coated main pcb (printed circuit boards) which offer extra layers of protection to help prevent moisture or damp air from damaging the product.
2. BOSS Audio Systems R1100MK Car Amplifier and 8 Gauge Wiring Kit – 1100 Watts Max Power, 2 4 Ohm Stable, Class AB, Monoblock, Mosfet Power Supply, Remote Subwoofer Control
Feature
- WIRING INSTALLATION KIT: 30 Ft Speaker Wire, 20 ft. 8 GA Red Power Cable, 16 ft. 18 GA Blue Turn-On Wire, 3 ft. 8 GA Black Ground Cable, Competition Quality Fuse Holder with AGU Fuse
- WIRING INSTALLATION KIT CONTINUED: 10 5/16″ and 1/4″ Ring Terminals, 6 ft. Split Loom Tubing, 3 Rubber Grommets, 20 4″ Wire Ties, 20 ft. High Performance blue RCA (TRCA) Interconnect
- AMPLIFIER POWER: 1100 Watts Max x 1 @2-Ohms, 550 Watts Max x 1 @4-Ohms
- CLASS A/B TOPOLOGY: Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal. Efficiency is the name of the game
- MOSFET POWER SUPPLY: A MOSFET is basically an electrical switch that allows the flow of electrical current. It controls the output voltage and current precisely by removing the output current sensing loss And eliminating all secondary feedback circuitry
- DIMENSIONS: The R1100M is 9. 1 inches in Depth, 10. 4 inches in Width and 2. 3 inches in Height. It weighs 4. 4 lbs.
- VARIABLE LOW-PASS CROSSOVER: Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction
- SWITCHABLE BASS BOOST: Bass Boost allows you to adjust the low bass within the boost range to just the way you like it
Description
BOSS Audio R1100MK Car Amplifier and 8 Gauge Wiring Kit – 1100 Watts Max Power, 2/4 Ohm Stable, Class A/B, Monoblock, MOSFET Power Supply, Remote Subwoofer Control
3. 16-PRX300.4 – Memphis 4-Channel 300W RMS 600W Max Power Reference Amplifier
Feature
- Compact aluminum chassis | Ultra bright LED accent lighting | Signal sense turn on
- Variable Bass Boost (0-12dB) centered at 45Hz | High level speaker inputs | Fully variable high & low pass crossovers
- Protection circuitry against overload, short circuit, thermak & reverse polarity with LED status lighting | Remote level bass boost | Removable magnetic “M” badge conceals top mount controls
- RMS 4Ω (Watts): 50 x 4 | RMS 2Ω (Watts): 75 x 4 | RMS 1Ω (Watts): N/A | Bridged Mono Power 4Ω (Watts): 150 x 2
- THD % (4Ω): <0.02 | Frequency Response: 20Hz - 20kHz | Dimensions: 12.9" x 7.4" x 2"
Description
MEMPHIS PRX300.4 AMP 4-CHANNEL 600W MAX COMPONENT SPEAKERS TWEETERS AMPLIFIER
4. Memphis Audio 16-SRX300.4 Amplifier
Feature
- 4-channel car amplifier | 50 watts RMS x 4 at 4 ohms (75 watts RMS x 4 at 2 ohms) | 150 watts RMS x 2 bridged at 4 ohms (4-ohm stable when bridged)
- Variable low-pass filters (30-250 Hz, 12 dB/octave) | Variable high-pass filters (50-1000 Hz, 12 dB/octave)
- Selectable bass boosts (0, 6, 12 dB at 45 Hz) | Preamp and speaker-level inputs
- Fuse rating: 25A x 2 | 8-gauge power and ground leads recommended — wiring and hardware not included with amplifier
- Dimensions: 13-7/8″W x 2-1/16″H x 8-1/8″D
Description
MEMPHIS SRX300.4 4-CHANNEL 600 WATTS COMPONENT SPEAKERS MIDS TWEETERS AMPLIFIER NEW
5. Memphis MXA850.5M 5-Channel Marine Amplifier
Description
Memphis Audio MXA850.5M Water Resistant 5 Channel Amplifier – Memphis Xtreme Series Memphis Xtreme Audio amplifiers are water and element resistant and designed for use in the harshest conditions. Whether you need the power to kick sound from a wake tower or want to keep the party going at the dunes, these amplifiers are engineered to withstand anything you throw at them. This MXA850.5M is a 5-channel amplifier that features marine-grade construction and pumps out 850 watts RMS. It also features variable subsonic filters and bass boost to give you the maximum amount of control. See below for more features and specifications. Features:Water and Element Resistant Conformal Coated Circuit BoardEfficient Class D DesignVariable Bass BoostVariable Subsonic Filters3 Channel Remote IncludedBright Blue Memphis LED Accent StripWaterproof Control Cover Specifications:RMS Power/CH @ 4Ω: 60W x 4Ch + 175W x 1CHRMS Power/CH @ 2Ω: 100W x 4CH + 300W x 1CHRMS Power/CH @ 1Ω: 450W x 1CHRMS Power/Bridged 4Ω: 235W x 2CHTHD: <1% signal="" to="" noise="" ratio:="">95dBFrequency Response: 20Hz – 20KHz/20Hz – 250HzCrossover Frequency (HPF): 50Hz – 500HzLow Level Input Sensitivity: 100mV-5.5VLow Level Input Impedance: 24KFuse: 40A x 2Recommended Amp Kit: 4 GaugeDimensions: 13.4″ x 6.1″ x 2.16″ This listing is for one (1) MXA850.5M water-resistant amplifier.
6. Memphis Audio VIV400.4 SIX FIVE Series 400W 4-Channel Car Amplifier
Feature
- 65 watts RMS x 4 at 4 ohms (100 watts RMS x 4 at 2 ohms) | 200 watts RMS x 2 bridged at 4 ohms (4-ohm stable in bridged mode)
- Front channels: Variable high- or low pass filter (10-5,000 Hz, 24 dB/octave)
- Rear channels: Variable high-pass filter (10-500 Hz, 24 dB/octave) | Variable low-pass filter (50-5,000 Hz, 24 dB/octave) | Bandpass filter engages both
- Variable bass boost (0-18 dB at 45 Hz) on front and rear channels
- Dimensions: 10-15/16″W x 2-1/4″H x 8-1/4″D
Description
Memphis Audio VIV400.4 400 Watt RMS 4 Channel Amplifier VIV SixFive Series amplifiers boast big power and acoustically accurate performance wrapped in a beautiful anodized brushed aluminum package. The single-sided wire terminals make running a clean install simple and adjusting the amp has never been easier thanks to the top-mounted magnetic door covering the precision DSP control panel. SixFive Series amplifiers are built on a relatively compact chassis given their impressive power handling making locating a suitable mounting location simple. Features:Digital Signal Processing with 24dB and 48dB Crossover SlopesAngel Hair Anodized Finish7 Color Selectable Color Changing LED PanelM-Equalization Bass Boost Allows for Both Frequency and Q Factor Adjustment for Precise Tuning of Your Subwoofer System.Bass Boost up to 18dBDC/Signal Sense/12V Turn-OnBand-Pass Crossover on Rear Channels Allows Expanded System Options Specifications:RMS Power @ 4 Ohms: 65W x 4RMS Power @ 2 Ohms: 100W x 4Bridged/Mono Power at 4 Ohms: 200W x 2THD% at 4 Ohms: <1% frequency="" response:="" 10hz="" -="" 20khz="" dimensions="" (l="" x="" w="" x="" h):="" 10.9"="" x="" 8.2"="" x="" 2.2"="" input="" range:="" 220mv="" -="" 10.3v="" recommended="" wire="" gauge:="" 4="" gauge="" this="" listing="" is="" for="" one="" (1)="" viv400.4="" amplifier.="">
7. Blaupunkt 1500W 4-Channel, Full-Range Amplifier
Feature
- 1500W Maximum Power Full-Range Amplifier
- Optimized 150-watt RMS output and a max power output of 1500 watts, you can give your music a huge boost in power that will have you and your passengers partying while on the road
- This slim amplifier fits perfectly into any trunk so you can easily connect it to your stereo system
Description
The Blaupunkt 1500W 4-Channel, Full-Range Amplifier (AMP1504) embodies over 90 years of innovation and excellence in Blaupunkt products, making it the perfect amplifier to install into your motor vehicle. With an optimized 150-watt RMS output and a max power output of 1500 watts, you can give your music a huge boost in power that will have you and your passengers partying while on the road. This slim amplifier fits perfectly into any trunk so you can easily connect it to your stereo system. Get amped up for the Blaupunkt 1500 Watts 4-Channel, Full-Range Amplifier (AMP1504) and take your car to the next level.
Amplifier Class: AB
No of channel: 4/3/2 Channel
Max. Output Power: 1500W x 4
RMS Power (4 Ohms): 150W x 4
RMS Power (2 Ohms): 300W x 4
Frequency Response: 10Hz – 45Hz
Signal-To- Noise Ratio: =>90dB
Voltage Supply: 11 – 15V DC
Gain Adjust: 150mV-6V
Total Harmonic Distortion: <=0.05 percent
RCA Input: 4-Channel
Crossover Frequency: 50Hz – 400Hz
Crossover Slope (dB/oct): 8-10dB/oct
Fuse: 30A x 2
Dimension: 8.6″ x 7.5″ x 2.1″
8. BOSS Audio Systems R3004 – Riot 1200 Watt, 4 Channel, 2 4 Ohm Stable Class AB, Full Range, Bridgeable, Mosfet Car Amplifier with Remote Subwoofer Control
Feature
- 300 W MAX Power @ 2 Ohm x 4 Channels
- 150 W MAX Power @ 4 Ohm x 4 Channels
- 600 W MAX Bridged Power @ 4 Ohm x 2 Channels
- Full-Range, Class A / B Topology, MOSFET Power Supply
- Low and High Level Inputs, Variable Filter, Variable Bass Boost
- Remote Subwoofer Control
- Dimensions: Depth 12.3” x Width 10.4” x Height 2.3”
- 6 Year Platinum Online Dealer Warranty
Description
Get your music pumping with the Boss Audio Riot R3004 Class A/B 4-Channel Full Range Amplifier. This 2-Ohm stable Amplifier features 1200 Watts Max Power with a MOSFET power supply to maximize your music. Customize the sound with Variable Low Pass Crossover, High Pass Crossover and Bass Boost. Tweak the Bass with the Remote Subwoofer Control. Bridge channels for more power and flexibility. Amplifiers in the Riot Series are perfect for first time car audio buyers looking to add Bass, enhanced sound and performance to their system at an affordable price. Pump up the volume with the Boss Audio R3004. For further product details, please scroll down.
9. Memphis Audio VIV900.5 75W x 4 + 500W x 1 Car Amplifier
Feature
- Features: 5-channel car amplifier, 50 watts RMS x 4 + 300 watts RMS x 1 at 4 ohms / 100 watts RMS x 4 + 500 watts RMS x 1 at 2 ohms / 150 watts RMS x 2 bridged at 4 ohms + 500 watts RMS x 1 at 2 ohms, Class D amp technology
- Tuning Controls: front channels: Variable high- or low pass filter (10-5,000 Hz, 24 dB/octave)
- Rear channels: Variable high-pass filter (10-500 Hz, 24 dB/octave) / Variable low-pass filter (50-5,000 Hz, 24 dB/octave) / Bandpass filter engages both
- Subwoofer channel: Variable subsonic filter (10-80 Hz, 24 dB/octave) / Variable low-pass filter (50-500 Hz, 24 dB/octave) / Variable bass boost (0-18 dB at 45 Hz)
- Other Features: Optional wireless remote subwoofer level control available, Preamp inputs, Speaker-level inputs (require speaker wire to RCA adapters), Hinged magnetic cover plate conceals top-mounted controls, 7 color selectable LED logo, 4-gauge power and ground leads and a 80-amp fuse recommended — wiring and hardware not included with amplifier, No onboard fuses — when installing multiple amps in a system, an additional 80-amp in-line Fuse between the distribution block and this amplifier is
Description
Memphis VIV900.5 5-Channel 100W RMS x 4 + 500W RMS x 1 DSP Amplifier
10. Planet Audio AC800.4 4 Channel Car Amplifier – 800 Watts, Full Range, Class A/B, 2-4 Ohm Stable, Mosfet Power Supply, Bridgeable
Feature
- Power – 200 Watts Max x 4 @2-Ohms, 100 Watts Max x 4 @4-Ohms, 400 Watts Max x 2 Bridged @4 Ohms
- Class A/B Topology – Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal. Efficiency is the name of the game
- Full Range – With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers
- Variable Gain Control – The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier
- Variable Bass Boost – With Variable Bass Boost you have the control of exactly how much BASS you want to pump out to your subwoofer(s)
- Bridgeable – Dramatically increase the power output to you speakers and subwoofers by connecting two amplifier channels
- Specs – Dimensions: 10” x 10” x 2.4”, Weight: 6.6 lbs.
- Warranty – Planet Audio provides a powerful 6 year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.com. We strongly encourage professional installation of this product to ensure proper and safe functionality
Description
Drive up your music vibes with the Planet Audio Anarchy AC800.4 4-Channel Class A/B Full Range Amplifier. This powerful 2-Ohms stable Amplifier features 800 Watts Max Power with a MOSFET power supply for clean, strong sound. Customize the sound with Variable Low Pass Crossover, Fixed High Pass Crossover and Bass Boost. Bridge channels for more power and flexibility. The Anarchy Series of Amplifiers are built to break the rules, allowing you to customize and control your sound so you can live like a mobile anarchist, clear and loud. Revolutionize your audio experience with the Planet Audio AC800.4.
For more product details, please scroll down.
Conclusion
By our suggestions above, we hope that you can found Memphis 4 Channel Amp for you.Please don’t forget to share your experience by comment in this post. Thank you!
