Top 10 Reconditioned Bosch Miter Saw

The DEWALT DWS779 12″ Sliding compound Miter saw features a powerful 15 amp, 3, 800 RPM motor that delivers extended power and durability. It has a super efficient dust collection system that captures over 75% of dust generated. This miter saw also offers an exclusive back fence design which cuts up to 2×16 dimensional lumber at 90° and 2×12 at 45°.

The 12 in. Dual-bevel Glide Miter saw features the smooth cutting motion, accurate performance and space-saving design of Bosch Patented axial-glide system.

The DW715 12 in. Single-bevel compound Miter saw is powered by a 15 amp motor to drive 4, 000 RPM, delivering Extended power and durability. Features stainless steel Miter detent plate and cam Miter Lock that provide repeatable accuracy and durability with easy adjustments. Tall sliding fences support 5-1/2 in. Of base molding vertically and 5-1/2 in. Of crown molding vertically nested. Lightweight design and built-in carry handle for portability.

The Bosch CM8S 8-inch single bevel sliding compound Miter saw features a Bosch exclusive design delivering a well-balanced saw with a top carry handle at the center of gravity and weighing only 37 lbs., These features easily provide one-handed portability on and off the job. Accessible controls make it easy to change bevel settings without reaching behind the saw. The integrated expanding work piece supports, large easy to read Miter and bevel scales and detent system provides quick and accurate cuts. Uniform marks from 52-degrees left to 60-degrees right with 10 adjustable Miter detents set at most common cuts. The CM8S also has the same crosscut capacity (12-3/4-inch) as a 10-inch Miter saw, at 30-Percent the weight.

A mightier Miter saw. Backed by legendary worm drive gearing, The 12 in. Dual bevel sliding miter saw combines dependable quality and lightweight portability into one powerful tool. The time-tested worm drive provides relentless power with a 15 amp Dual-Field motor that keeps cool on the job, increasing longevity and work efficiency. Dual bevel capabilities allow for both left and right cuts, paired with adjustable bevel stops and 4 x 14 cross cut capacities to let you handle any joints on the jobsite. This saw is the lightest in its class – making For easy transportation. Feel the might, with SKILSAW.

DEWALT DCS361MB 20V Max Cordless Miter Saw Bare tool utilizes a 20V Max Battery Pack (DCB204) which provides on average, 183 cuts of 2×4 Pine – or 275 cuts of 3-1/4 Pine baseboard. It offers an integrated XPS cross cut positioning system that provides adjustment free cut line indication for better accuracy and visibility. The 7 1/4 Inch Sliding Miter Saw features a single left bevel which ranges from -3Degree to 48Degree left. With a 3 1/2 inch maximum vertical, 3 5/8 inch crown nested, and 2×8 inch horizontal cut capacity, this saw will handle most of the common cuts needed. The adjustable stainless steel miter detent plate has 10 positive stops to improve productivity and ensures cutting accuracy. An oversized bevel scale makes bevel angle adjustments accurate and easy. The compact, lightweight design (31.6 bs.) allows for easy transport and storage. It has a cam lock miter handle which delivers quick and accurate miter angles, along with a precise miter system and machined base fence support for optimized durability and cutting accuracy.

The Hitachi C10FCG 10″ Compound Miter Saw is lightweight for easier transport. The 15 Amp motor generates a no-load speed of up to 5,000 RPM for making crosscuts and miter cuts with ease. This saw offers a bevel range of 0-45 degrees to the left to provide clean and accurate bevel cuts. It is designed for woodworkers who demand precision, reliability and versatility on the job.

10″ Sliding compound Miter saw with 16″ Nominal cross cut capacity

Product Description

The DEWALT 12″ Double Bevel Compound Miter Saw is powered by a 15A 3,600 RPM and offers a new precise miter system and machined base fence support for optimal accuracy. Features a new handle design for maximum portability, cam lock miter, detent override, bevel crown stops and is best in class capacity. Constructed for easy, hassle-free use saw’s capacities are miter 0 to 60 degree left, 0 to 50 degree right, bevel 0 to 48 degree left and right, cross cuts 2 x 14 on 90 degree and miters 2 x 10 on 45 degree, base capacity 6-1/2″ left and right with a crown capacity of 6-5/8″. Carbide blade, dust bag, wrench and manual, 90 day money back guarantee, one year service, three year limited warranty and accessory DW7187 adjustable miter saw laser system included. Weighs 54 pounds.

Amazon.com

The DEWALT DWS780 12-inch double bevel sliding compound miter saw expertly walks the line between the rugged durability and fine precision that professionals need on the job site. From delicate woodworking to heavy-duty framing and deck building, the DWS780 provides the accuracy, capacity, and portability that cabinetmakers, trim carpenters, framers, installers, and contractors need.

Precise Cutting Without Recalibration
The DWS780 miter saw features extremely solid construction and the new XPS cross-cut alignment system that features an improved ultra-bright LED light, which casts a laser-like shadow on the work surface and shows the user precisely where the blade will come in contact with the material. This unique alignment system requires no recalibration over time or after changing blades, which makes it more accurate and durable than traditional laser guides.

Ultimate Durability
The DWS780 miter saw’s rugged guards; precision-machined castings, fences, and bevel system; and tough stainless steel miter detent plate are designed to withstand the constant rigors of the job site.

High-Capacity Cutting
The saw features a powerful 15-amp motor that delivers 3,800 RPM. For convenience, the power cord is routed through the rail in the back, eliminating interference with the slide. Additionally, the saw offers an industry-leading combination of cut capacities, which includes 6-3/4-inch vertical capacity, 7-1/2-inch nested crown capacity, 13-7/8-inch horizontal capacity, and exclusive back fence design that cuts up to a 2×16 at a 90-degree angle and 2×12 at a 45-degree angle. To simplify and maximize vertical cutting capacity, the unit includes a rail lock latch for holding the head away from the fence.

Hassle-Free Operation
The dual bevel system is easy to see and use in job site conditions thanks to its high-visibility scale and easy angle adjustment. Bevel from zero to 49 degrees with positive stops at 0 degrees, 22.5 degrees, 33.9 degrees, 45 degrees, and 49 degrees in both right and left directions. The saw also miters 60 degrees to the right and 50 degrees to the left and features an adjustable miter detent plate with 10 positive stops. A cam lock miter button allows the user to lock angles between detents. A miter detent override is also used to allow precise angle adjustment without falling into detents.

What’s in the Box
One DEWALT DWS780 12-inch double bevel sliding compound miter saw, one carbide blade, one blade wrench, one dust bag, and one vertical material clamp.

See all Product description