The Best Spindle Door Knob Set

Product Description

These vintage style door knobs are constructed of steel and come in a satin nickel finish. This set of knobs is designed for indoor use only, and it includes a 17/64 in. x 3-1/2 in. steel spindle with 3/8 in. -20 threads. This classic style knob set fits square drive spindle systems commonly found in antique and vintage door hardware sets, and it can adjust to accommodate different door thicknesses. The shanks on these knobs include set screws for fastening the knobs to the square spindle, but it does NOT include any of the following components and they must be purchased separately: The internal mortise lock body, the door rosettes, the trim and strike plates, or the latch and fasteners. For SOLID BRASS knobs, kindly see Prime-Line’s model number E 2297. Note: This item cannot be used on pre-bored doors that have large, newer style door knob holes without first prepping them to receive this hardware. *Installation tip #1: Because the fasteners of the rosettes (purchased separately) require a solid surface to mount to, the large 2-1/8 in. (approximate size) holes must first be filled with a hardening filler, to then be able to receive the rosette fasteners. Products like Fix-It-All and Bondo Body Filler have worked well for some, but care must be used to avoid damaging any prefinished door surfaces during application and finishing. *Installation tip #2: Apply a small amount of Loctite ThreadLocker 271 to the set screw threads in the event they are loosening – Loctite purchased separately.

From the Manufacturer

These knobs are constructed from solid brass and plated in satin nickel. They feature a 1/4 in. square spindle shaft. This style knob is used on various exterior and interior locksets.

Product Description

If your door knob set is acting up or broken, this E 2537 Mortise style fluted glass door knob set is the perfect choice for updating and fixing hardware on interior doors. With a beautiful and classic fluted glass and bronze finish, it’s the perfect choice for your antique or vintage interior doors. Installation is a breeze, and the glass door knob set features 2” outside diameter knobs. These door knobs are for interior use only, and includes a 17/64 in. x 3-1/2 in. steel spindle with 3/8 in. -20 threads. This classic style door knob set fits square drive spindle systems commonly found in antique and vintage door hardware sets, and it can adjust to accommodate different door thicknesses. The diecast base on these knobs include the set screws for fastening the knobs to the square spindle, but it does NOT include any of the following components and they must be purchased separately: The internal mortise lock body, the door rosettes, the trim and strike plates, or the latch and fasteners. For matching rosettes see Prime-Line’s model number E-2543. Prime-Line Products does not currently manufacture a matching latch bolt, but you might consider using model number E-2497 which is a complete vintage mortise lock set in a classic bronze finish. Note: This item cannot be used on pre-bored doors that have large, newer style door knob holes without first prepping them to receive this hardware. Installation tip #1: Because the fasteners of the rosettes (purchased separately) require a solid surface to mount to, the large 2-1/8 in. (approximate size) holes must first be filled with a hardening filler, to then be able to receive the rosette fasteners. Products like Fix-It-All and Bondo Body Filler have worked well for some, but care must be used to avoid damaging any prefinished door surfaces during application and finishing. Installation tip #2: Apply a small amount of Loctite ThreadLocker 271 to the set screw threads in the event they are loosening – Loctite purchased separately.

From the Manufacturer

These knobs are made from glass and measure 2 in. in diameter. They have a die cast constructed base as used on interior and exterior locksets and a 1/4 in. square spindle. They come plated in classic bronze and fit most old style passage doors.

Product Description

These knobs are constructed from solid brass and plated in classic bronzed. They feature a 1/4 in. square spindle shaft. This style knob is used on various exterior and interior locksets.

From the Manufacturer

These knobs are constructed from solid brass and plated in classic bronzed. They feature a 1/4 in. square spindle shaft. This style knob is used on various exterior and interior locksets.

These vintage style door knobs are constructed of steel and come in a brass-plated finish. This set of knobs is designed for indoor use only, and it includes one 2-3/4 in. steel spindle, and one 3-5/8 in. steel spindle with 3/8 in. -20 threads. This colonial style knob set fits 1/4 in. square drive spindle systems commonly found in antique and vintage door hardware sets, and with the two (2) provided square spindles, it can adjust to accommodate doors of different thicknesses. These knobs feature a wrought steel Colonial design, and they have a 2-1/4 in. outside diameter with a rope embossed design on their face. The knob shanks include setscrews for securing the knobs to the square spindle. All other components of matching vintage design must be purchased separately, to include the internal mortise lock body, the door rosettes, the trim and strike plates, or the latch and fasteners. Note: This item cannot be used on pre-bored doors that have large, newer style doorknob holes without first plugging them to receive this hardware. *Installation tip: Because the fasteners of the rosettes (purchased separately) require a solid surface to mount to, the large 2-1/8 in. (approximate size) knob holes must first be filled with a hardening filler, to then be able to receive the rosette fasteners. Products like Fix-It-All and Bondo Body Filler have worked well for some, but care must be used to avoid damaging any prefinished door surfaces during application and finishing.

Product Description

This vintage style glass door knob set is constructed of clear fluted glass and brass plated materials. This knob set is designed for indoor use only, and it fits door panels from 1 in. to 1-3/4 in. thick. The diecast base on these knobs include the set screws for fastening the knobs to the 17/64 in. x 3-1/2 in. square steel spindle with 3/8 in. -20 threads. Note: This passage door set cannot be used on pre-bored doors that have large newer style door knob holes without first prepping them to receive this hardware. *Installation tip #1: Because the fasteners of the rosettes require a solid surface to mount to, the large 2-1/8 in. (approximate size) holes must first be filled with a hardening filler, to then be able to receive the rosette fasteners. Products like Fix-It-All and Bondo Body Filler have worked well for some, but care must be used to avoid damaging any prefinished door surfaces during application and finishing. *Installation tip #2: Apply a small amount of Loctite ThreadLocker 271 to the set screw threads in the event they are loosening – Loctite purchased separately

From the Manufacturer

This passage handle set is constructed from brass. It includes 2 glass handles, spindle, rosettes, and a mortise latch bolt. It comes complete with fasteners for a quick and easy installation.

Product Description

These vintage style door knobs are constructed of steel and come finished in a bright brass plating. This set of knobs is designed for indoor use only, and it includes a 17/64 in. x 3-1/2 in. steel spindle with 3/8 in. -20 threads. This classic style knob set fits square drive spindle systems commonly found in antique and vintage door hardware sets, and it can adjust to accommodate different door thicknesses. The shanks on these knobs include set screws for fastening the knobs to the square spindle, but it does NOT include any of the following components and they must be purchased separately: The internal mortise lock body, the door rosettes, the trim and strike plates, or the latch and fasteners. For SOLID BRASS knobs, kindly see Prime-Line’s model number E 2297. Note: This item cannot be used on pre-bored doors that have large, newer style door knob holes without first prepping them to receive this hardware. *Installation tip #1: Because the fasteners of the rosettes (purchased separately) require a solid surface to mount to, the large 2-1/8 in. (approximate size) holes must first be filled with a hardening filler, to then be able to receive the rosette fasteners. Products like Fix-It-All and Bondo Body Filler have worked well for some, but care must be used to avoid damaging any prefinished door surfaces during application and finishing. *Installation tip #2: Apply a small amount of Loctite ThreadLocker 271 to the set screw threads in the event they are loosening – Loctite purchased separately.

From the Manufacturer

These knobs are constructed from steel and come finished in brass. The knobs have a projection of 1-3/4 in. and a 9/32 in. square spindle. Easily fits on doors that are 1-3/8 in. thick.

Satin nickel, passage door knob latch set, glass knobs, latch is reversible to left or right handed door, decorative passage latch for 2-3/8 inch backset applications.

Product Description

These vintage style door knobs are constructed of SOLID BRASS and come in a bright polished-brass finish. This set of knobs is designed for indoor use only, and it includes a 17/64 in. x 3-1/2 in. steel spindle with 3/8 in. -20 threads. This classic style knob set fits square drive spindle systems commonly found in antique and vintage door hardware sets, and it can adjust to accommodate different door thicknesses. The shanks on these knobs include 2 set screws (per shank) for fastening the knobs to the square spindle, but it does NOT include any of the following components and they must be purchased separately: The internal mortise lock body, door rosettes, trim and strike plates, or the latch and fasteners. For brass plated stamped steel knobs, kindly see Prime-Line’s model number E 2280. Note: This item cannot be used on pre-bored doors that have large, newer style door knob holes without first prepping them to receive this hardware. *Installation tip #1: Because the fasteners of the rosettes (purchased separately) require a solid surface to mount to, the large 2-1/8 in. (approximate size) holes must first be filled with a hardening filler, to then be able to receive the rosette fasteners. Products like Fix-It-All and Bondo Body Filler have worked well for some, but care must be used to avoid damaging any prefinished door surfaces during application and finishing. *Installation tip #2: Apply a small amount of Loctite ThreadLocker 271 to the set screw threads in the event they are loosening – Loctite purchased separately.

From the Manufacturer

These knobs are constructed from solid brass. They feature a 9/32 in. square spindle shaft. This style knob fits on old style bit key lock systems.

Product Description

These knobs are constructed from steel and come painted white. They feature 2-1/4 in. diameter handles and a 9/32 in. square spindle shaft. Used on various exterior and interior locksets; fits old style passage doors.

From the Manufacturer

These knobs are constructed from steel and come painted white. They feature 2-1/4 in. diameter handles and a 9/32 in. square spindle shaft. Used on various exterior and interior locksets; fits old style passage doors.