The Best Top Of The Line Kegerator

With this Deluxe Kegerator Conversion Kit, Kegco provides everything you’ll need to quickly convert your refrigerator into a beer dispenser and begin dispensing delicious cold draft beer! From the durable commercial grade double gauge regulator to the NSF approved commercial-grade American D System keg coupler, every part is high quality and built to last, so you can dispense your own beer for years to come. We’ve even included a stainless steel drip tray that contains any drips, so cleaning up after every use is just as easy as the initial assembly! Detailed instructions are included in every kit.

This Standard Tower Conversion kit is the perfect solution for those who are converting a compact refrigerator or converting a freezer into a kegerator. This kit comes with brand new, high quality draft beer components and contains everything you will need to successfully convert your compact refrigerator/freezer into a kegerator at great savings. Note: Beverage Factory is the only Authorized Reseller of Kegco Kegerator Kits (Other sellers are selling inferior kits that are not Warrantied or Quality Assured Kegco Quality.

Whether you are a beer drinker or an avid entertainer you will be the best party host with this ultimate indoor freestanding kegerator by Danby Appliances. This dual tap keg cooler is an exceptional addition to any wet bar, game room or man cave and provides the convenience of two different cold beers on tap at once. It uses R600A refrigerant and has an automatic-defrosting system which makes for an excellent product with hassle-free maintenance. This keg cooler includes a single gauge regulator, CO2 tank and all required hardware. It has a precise mechanical-thermostat to keep your beer cold and a spotless-steel finish resembling stainless-steel but much easier to clean. Did we mention it has a scratch-resistant worktop? Furthermore, this unit includes an American Sankey coupler, a chrome guard rail and drip tray, and optional swivel castors for easy portability. The door hinge is reversible which allows you to adjust it for either left or right-handed opening.

Coldbreak jockey boxes are built specifically for the craft beer industry and designed so your beer has 100 percent contact with stainless steel. All shanks, coils, ferrules, and faucets are all made from stainless steel. Beverage line inputs are located on the back of the jockey box, allowing a clean look on the pour side. Perfect for any environment where individuals are self pouring (weddings, parties, banquets, etc.) or when Breweries need a lot of taps in a small space. Beverage jumpers and CO2 equipment sold separately (dispensing kits).

Kegco new hl-62n commercial grade dual gauge nitrogen regulator has been specially designed to deliver maximum convenience and durability while dispensing delicious Stout beer, coffee, and wine in busy commercial environments like bars, coffee shops, tasting rooms, and restaurants. This double gauge draft beer regulator has a Gauge on top that measures pressure in the keg as well as a gauge on the side that indicates how much nitrogen gas is left in the tank, so you’ll never again be caught off guard by an empty cylinder. Both gauges come equipped with rubber boots that help protect them from damage in the event of a fall, and a large pressure adjustment knob allows you to make quick and precise adjustments by hand. For added safety, This regulator also features an internal safety pressure relief valve that releases when the delivery pressure exceeds set pressure by 15 PSIG, a manual pressure release valve built into the regulator body, and a shut-off valve that makes it easy to quickly shut off pressure to the keg without backing up your beer line. This shut-off valve has a check Valve that prevents backflow into the regulator.

The TOP Quality CO2 Charger Kit is made from machined anodised aluminium,not plastic.if not ,just get full refund with no ask Pressure calibration table make you no worry about pressing the trigger on the charger too much or too little Just use the regulator to set the pressure, you can get good taste beer since you can dial in the PSI perfectly Package Included: 1×Preminum Regulated Co2 Charger 1 x GAS Disconnect Please Note: This gas meter cannot measure past 30psi,please adjust the control switch and let the pressure slowly increases.As it is a precision instrument,it will be damaged if you use it in improper way.The pressure calibration table does not affect your use when it doesn’t work,you can just use it with your feel or get a new pressure calibration table.Please confirm that the scale is zero when you get your product.If you have any question about this ,please contact us

Perfect for simultaneously dispensing two kegs of beer at the same pressure, this Kegco HL-62-2 Dual Gauge Two Product CO2 Regulator features a commercial-grade construction that has been specially designed to provide maximum convenience and durability in busy commercial environments like bars, tasting rooms, and restaurants. This double gauge regulator has a gauge on top that measures CO2 pressure in the kegs as well as a gauge on the side that indicates how much CO2 is left in the tank, so you’ll never again be caught off guard by an empty CO2 cylinder. Both gauges come equipped with rubber boots that help protect them from damage in the event of a fall, and a large pressure adjustment knob allows you to make quick and precise adjustments by hand. For added safety, this draft beer regulator features an internal safety pressure relief valve that releases when the delivered pressure exceeds the set pressure by 15 PSIG, a manual pressure release knob that has been built into the regulator body, and two shut-off valves that make it easy to instantly shut off pressure to the kegs without backing up your beer lines. These shut-off valves have a check valve that prevents backflow into the regulator.

This clean and modern looking is a great addition to any Kegerator, Bar or countertop. Perfect for dispensing Beer, Water or other beverages. It is very simple to install and ready in minutes. Just drill a 7/8″ hole, insert the tower and screw on from the bottom side. The bottom flange is a little over 2″ wide. Mounting shank is 4″ long. Includes Chrome plated brass faucet, black faucet knob, 5′ of beer tubing with connections and installation hardware.