Top 10 Track Saw Vs Panel Saw

Powerful 14-amp motor delivers 5,300-RPM for greater speed and faster cuts.

Product Description

Makita’s 7-1/4-inch hypoid saw (model 5477NB), combines a powerful 15 amp motor and Makita’s efficient hypoid gears with ease-of-use features for more power, better performance and superior cuts. The 5477NB is engineered for framing walls, Siding, roofs and floors using a range of dimensional lumber and engineered lumber, including OSB, LVL, PSL, plywood, and more. It is ideal for framers, builders, carpenters, and general contractors seeking a best-in-class 7-1/4-inch hypoid saw. The 5477NB has a powerful 15 amp motor with ball bearing construction for increased productivity. Makita’s efficient hypoid gears have greater surface contact and deliver more Constant power. The oil bath technology and sealed gear housing are engineered for less maintenance, with high quality heat treated hypoid gears for long lasting performance. The 5477NB includes a Makita 7-1/4-inch general contractor framing blade with advanced tooth design. The carbide tips are specifically set to withstand the harshest conditions such as plowing through nail-embedded wood. The blade is designed with special Makita heat vents strategically set to dissipate heat and increase performance.

Amazon.com

Makita’s 7-1/4-Inch Hypoid Saw, Model 5477NB, combines a powerful 15 AMP motor and Makita’s efficient hypoid gears with ease-of-use features for more power, better performance and superior cuts.

View larger

5477NB Features POWER – Powerful 15 AMP motor for increased productivity TECHNOLOGY – Oil bath technology and sealed gear housing for less maintenance PERFORMANCE – High-quality, heat-treated hypoid gears for long lasting performance CAPACITY – 0° – 51.5° bevel capacity with positive stops at 45° and 51.5° for truss and rafter cut-outs INCLUDES – Carbide tipped blade and wrench

Tool Specifications Blade diameter 7-1/4″ Arbor 5/8″ Max. cutting capacity 2-3/8″ at 90°   1-3/4″ at 45°   1-9/16″ at 50° No load speed 4,500 RPM AMPS (115V) 15.0 Overall length 17-3/4″ Net weight 14.3 lbs.

Hypoid Gears Deliver More Constant Power
The 5477NB has a powerful 15 AMP motor with ball bearing construction for increased productivity. Makita’s efficient hypoid gears have greater surface contact and deliver more constant power. The oil bath technology and sealed gear housing are engineered for less maintenance, with high-quality heat-treated hypoid gears for long lasting performance. The 5477NB has a large cutting capacity (2-3/8 inches at 90°, 1-3/4 inches at 45°, 1-9/16 inches at 50°) with a maximum bevel capacity of 0°-51.5° and positive stops at 45° and 51.5°, ideal for truss and rafter cut-outs. The large levers are designed for fast bevel and depth adjustments. In addition, the lower guard design improves performance when making bevel and narrow cuts.

Ease-of-Use Features
Ease-of-use features were also engineered into the saw. An over-sized handle and ergonomically designed rubberized grip provide improved control and comfort. The push button spindle lock and on-board blade wrench are designed for easy blade changes. The reinforced 10-foot cord is made for job site use, with externally accessible brushes for easy replacement and extended tool life. The base plate is chemically treated to resist rust and warping for superior cuts. The 5477NB includes a Makita 7-1/4-Inch General Contractor Framing Blade with Advanced Tooth Design. The carbide tips are specifically set to withstand the harshest conditions such as plowing through nail-embedded wood. The blade is designed with special Makita heat vents strategically set to dissipate heat and increase performance. The 5477NB also includes a blade wrench attached to the saw for fast and convenient blade changing.

Engineered for a Range of Applications
The 5477NB is engineered for framing walls, siding, roofs and floors using a range of dimensional lumber and engineered lumber, including OSB, LVL, PSL, plywood, and more. It is ideal for framers, builders, carpenters, and general contractors seeking a best-in-class 7-1/4-Inch hypoid saw. The 5477NB is just another example of Makita’s commitment to innovative technology and best-in-class engineering.

About Makita’s Power Tools
Cut after cut, Makita saws deliver power, performance and capacity with less weight and more ease-of-use features. Makita has a full range of corded and cordless saws and blades for cutting wood, metal and masonry, including table saws, miter saws, reciprocating saws, circular saws, jig saws, metal cutting saws, plunge saws, and more, as well as a complete line of blades and accessories.

About Makita
Makita is a worldwide manufacturer of industrial quality power tools and offers a wide range of industrial accessories. Makita applies leading-edge innovation to engineer power tools that are more compact and energy efficient, yet deliver industrial strength power and results. Makita U.S.A., Inc. is located in La Mirada, California, and operates an extensive distribution network located throughout the U.S. For more information, please call 800/4-MAKITA (800/462-5482) or visit makitatools.com. Makita is Best in Class Engineering.

Warranty
Every Makita tool is thoroughly inspected and tested before leaving the factory. If you are not satisfied with any Makita tool within 30 days of purchase, return it and Makita will provide a replacement or refund. Each Makita tool is warranted to be free of defects from workmanship and materials for the period of ONE YEAR from the date of original purchase. Should any trouble develop during this one-year period, return the COMPLETE tool, freight prepaid, to one of Makita’s Factory or Authorized Service Centers. Please see makitatools.com for complete details.

Whats in the Box
Makita 5477NB 7-1/4-Inch Hypoid Saw, carbide tipped blade and wrench.

See all Product description

Get precise, accurate cutting and a splinter-free mirror finish, without the table saw. Makita’s SP6000K 6-1/2-Inch Plunge Circular Saw delivers smooth, straight cuts. When you combine it with an optional guide rail system, constructed with anodized aluminum, the saw and rail system work together to produce accurate cuts with minimal tear-out. The saw combines a powerful 12 amp motor and a large cutting capacity with magnesium components for less weight and electronic speed control to maintain constant speed under load for smooth cutting and a splinter-free mirror finish. The SP6000K is a more portable option to a table saw and is ideal for use on the jobsite or in the shop. Includes 55 inch guide rail. Do not expose power tools to rain or wet conditions. Ideal for cutting large wood panels and other wood materials in confined areas.

Contains two boxes : 

Box 1/2 Dimensions : 16″ x 12″ x 14″, Box 2/2 Dimensions : 59″ x 2.75″ x 10.25″

Experience the incredible power of the TS 75 plunge cut saw. No other saw comes close to its power and pinpoint accuracy. Capable of cutting material that is 2-3/4″ thick, this saw will leave an edge that is both burn and splinter-free, creating edges that are clean enough to glue without any further prep work. The TS 75 is suitable for cutting solid doors, truing rough lumber, cutting out window frames, and a host of other applications. Save time and create matched panels by cutting stacked sheet goods with one cut. Try the TS 75 once, and you will never look back.

Product Description

The Prazi USA PR7000 Beam Cutter (for 7-1/4-Inch Worm Drive Saws) cuts angles up to 45 degrees. The vertical foot-plate and built-in sight allow smooth, exact square cuts and ensures gliding manageability while cutting perfectly straight lines. With a 12 in. cutting capacity, you can professionally execute the following cuts and many more: rafter pitch cut, miters, stairs, arches, log cuts, compound angles, band saw cut, notch 6×12 panels and ripping. Quick & Easy Installation – 60 Second Installation, Installs with Three Bolts (included), No Need to Remove Any Saw Parts. Built-In Safety Features – Dust Deflector Guard, Double-Guarded, Kickback Resistant, Guide Bar, Low-Profile, Anti-Kickback Chain, Chain Guard with OSHA Recommendation. Vertical blade produces smooth, exact, perfectly square cuts. Foot Plate & Built-In Sight – Ensures perfectly straight cuts, Provides gliding manageability & precise control. Field Proven – Tested & proven under real world conditions, Meets the demands of every professional. NOTE: PR-7000 fits only SKIL or BOSCH 7-1/4″ and 8-1/4″ worm drive saws. Replacement chain Number P7020.

From the Manufacturer

The Prazi USA PR7000 Beam Cutter (for 7-1/4-Inch Worm Drive Saws) cuts angles up to 45 degrees. The vertical foot-plate and built-in sight allow smooth, exact square cuts and ensures gliding manageability while cutting perfectly straight lines. With a 12 in. cutting capacity, you can professionally execute the following cuts and many more: rafter pitch cut, miters, stairs, arches, log cuts, compound angles, bandsaw cut, notch 6×12 panels and ripping. Fits Skil models 77 and 5860; Makita model 5077B; Milwaukee models 6377 and 6378; Black & Decker models 2700, 2710 and 3051; Craftsman model 2761; and DeWalt model DW377. Does not work with the DeWalt model DW378G.

Product description

Track Clamps are for use with Track Saw cutting system. One-handed operation for fast set-up.

From the Manufacturer

Track Clamps are for use with Track Saw cutting system. One-handed operation for fast set-up.

The Rockwell Compact 4-1/2-inch Circular Saw (RK3441K) is a powerful and functional circular saw which can replace conventional 7-1/4-inch circular saws. No need for a bulky circular saw when the Compact Circular Saw will cut 2x4s and sheet goods in the same amount of time with ease and comfort, thanks to its lightweight and compact design. You’ll finish your jobs quicker without having to drag out the big heavy circular saw. Most cuts made with circular saws are on materials less than 2″ thick. With the Rockwell Compact Circular Saw, tackle any of these jobs with ease, comfort and control… and with just one hand. The slim grip handle improves comfort while enhancing grip and control, allowing you to guide the saw with just one hand. The result? Quick, easy operation with increased maneuverability for making cut-offs, plunge cuts and rips. Ideal for wood, especially plywood, hardwood flooring, nominal 2” lumber, molding, pegboard, dowels, etc.

TURN AN ORDINARY CIRCULAR SAW INTO A PRECISION EDGE-GUIDED CUTTING TOOL

Great projects start with high-quality cuts, and you can make those cuts—more easily than you ever imagined—using your circular saw plus the Rip-Cut Circular Saw Edge Guide.

The Kreg Rip-Cut turns your circular saw into a precision edge-guided cutting tool that makes straight, accurate, repeatable cuts in plywood, MDF, and other large sheets. With the Rip-Cut, you can cut with the confidence you want and the precision you need.

The Rip-Cut easily makes straight, accurate, repeatable cuts without measuring, marking, or having to keep the saw on the cut line. The Rip-Cut does this with a long edge guide that follows the straight edge of the sheet you are cutting. So, all you have to do is lock the saw in at the measurement you want—up to 24″—using the built-in measuring scale, and then make your cut.

With a built-in measuring scale, you don’t have to measure and mark each cut, either. Just lock the saw sled at your desired cut width, and you’re all set, whether you need to cut one piece or make multiple pieces of the exact same size. Plus, the Rip-Cut makes it easier to cut down large sheets by yourself.

The Rip-Cut is very easy to use. Simply mount your saw to the universal sled—it accepts most left-blade or right-blade saws—and then slide the sled onto the aluminum rail. After a simple one-time calibration, you can lock in your cut width (up to 24″) using the measuring scale and precision cursor. Then, just hold the edge guide against the edge of your sheet as you guide the saw. You’ll get straight, accurate, repeatable cuts easily every time.