Top 10 Troy Bilt 2200 Pressure Washer

2400-2700 PSI, Flow Rating of 2.4 GPM, with 7/8″ and 3 mounting holes. INCLUDES THERMAL RELEASE VALVE. SPECS: FITS 7/8″ Inch (22.225mm) SHAFT VERTICAL CRANK ENGINES. MOUNTING BOLTS: FROM MAIN CENTER SHAFT TO EACH MOUNT BOLT IS 4″ – CENTER TO CENTER SPACING BETWEEN MOUNTING BOLTS IS: 7 11/16″ – 6 3/16″ – 6 7/16″

Pressure Washer Pump, 2800psi, Vertical 308653045 /308653052 2800 psi 2.5 gallons per minute Pre-filled with oil and ready to use Mounting Bolts Spacing between mounting bolts: 7 11/16″ – 6 3/16″ – 6 7/16″ 7/8 shaft Fits Honda GC135, GX140, GC160, Briggs and Kohler engines with 7/8 inch diameter shaft Will NOT fit 3/4” shaft motors, these motors require different pump Thermal Relief Valve IS Included but will need to be installed opposite the inlet fitting. WHEN MOUNTED, the inlet and outlet will point in the OPPOSITE DIRECTION as the spark plug. This part is compatible with the following machines: Homelite HL80833 3-N-1 Hi-Speed Gasoline Pressure Washer UT80709 Pressure Washer UT80911 Pressure Washer UT80911A Pressure Washer UT80709A Pressure Washer UT80835 3-N-1 Hi-Speed Pressure Washer UT80933 3-N-1 Hi-Speed Pressure Washer UT80993 Pressure Washer UT80993A 2700 PSI Gas Pressure Washer GC80747 G-Clean Pressure Washer HLCA80710 Pressure Washer HU80709 Pressure Washer HU80911 Pressure Washer HU80709A Pressure Washer HU80911A Pressure Washer HU80714 Pressure Washer HU80915 Pressure Washer HU80715 Pressure Washer HU80722 Pressure Washer HU80722A Pressure Washer HU80833 3-N-1 Hi-Speed Gasoline Pressure Washer HU80833A 3-N-1 Hi-Speed Gasoline Pressure Washer HUCA80709A Pressure Washer PS262311 Pressure Washer PS80944 Pressure Washer PS80946 Pressure Washer PS80979 Pressure Washer PS80979A Pressure Washer UT80993B Pressure Washer UT80993D Pressure Washer WF80710 Pressure Washer WF80911 Pressure Washer HL80835 3-N-1 Hi-Speed Gasoline Pressure Washer UT80993E Pressure Washer UT80993F Pressure Washer Ryobi RY80930 Pressure Washer

It is the customers responsibility to make sure that this is the correct part for their unit. New vertical 7/8″ shaft pressure washer water pump for many different makes and models. SPECS: 7/8″ shaft, aluminum head, 2800 PSI, 2.3 GPM, Includes thermal release valve, chemical injector, garden hose hookup (22mm outlet), pump oil already installed, 1 year warranty against manufacturer defects. If you are not sure if this is the correct pump for your unit please send us model number off your machine and we will gladly check for you. PLEASE NOTE: Spacers may be required for installation depending on motor configuration. Spacers are used in the case that the pump arm(s) hits the engine. Pump may require longer mounting bolts due to its thicker flange, for added strength.

It is the customers responsibility to make sure that this is the correct part for their unit.

✯Good Customer Service:✯
Any quality or use problem ,feel free to contact us. The professional service team is always here for you.

★Package Includes:
●1x Pressure spray gun
●1x Replacement Wand Lance
●5x Nozzles

★Specification:
☆Pressure spray gun
1.Length:18″
2.Requires pressure: 70BAR – 1000PSI;Maximun pressure: 275BAR – 4000PSI; Maximum flow:5.3Gpm.
3.Metric M22-14mm inner connector fitting.

☆Replacement Wand Lance
1.Length:19.68″
2.M22-14 fitting,1/4″ quick-disconnect end
3.Maximun pressure:4000PSI

☆Nozzles
1.degree:red(0°);yellow(15°);green(25°);white(40°);black(soap).
2.1/4 inch connection design

★Applicat
☆Pressure Washer gun with M22 connection, compatible with use with most of gasoline powered and electric powered pressure washers.
☆It allows you to apply soap and detergents, spray hard to reach places like crevices in sidewalks and driveways, clean stains from concrete and brick, clean painted surfaces like wood and lawn mowers, and wash windows and screens. No task is hard to tackle.

★WARNING:
DO NOT POINT AT FACE OR OTHER PERSONS, AND DO NOT USE CLOSE TO SURFACE.

The Briggs & Stratton 6188 Pressure Washer Replacement Hose will replace worn or damaged hoses in cold-water pressure washers up to 3,000 PSI. Equipped with a Dual O-Ring Sealing System, the 6188 replacement hose will remain secure on your device. This 30-foot hose connects to male M22 pump and spray gun fittings, making it compatible with most brands of pressure washers. Help keep your outdoor power equipment running at peak performance by ordering the Briggs & Stratton 6188 Pressure Washer Replacement Hose. Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines. Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them also ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations. For more than a century, Briggs & Stratton branded engines and power equipment have helped consumers get the job done. Known for hard-working, dependable, efficient products, Briggs & Stratton is the world’s largest producer of gasoline engines for outdoor power equipment. Briggs & Stratton products are designed, manufactured, marketed and serviced in over 100 countries on all seven continents. Visit www.amazon.com/briggsstratton for more information on Briggs & Stratton and our extensive line of products.

Note: Please review all product information to ensure that this product is compatible with your unit. A Message to the Customer: The ROP Shop staff constantly strives to provide clear and concise product information. We understand that sometimes it can be difficult to confirm product compatibility. It is your responsibility to confirm this is the correct product you need; therefore, we encourage all customers to fully review the information provided in this listing prior to purchase. Nothing is worse than having to return a product, trust us…we get it. Let’s work together to avoid this! If you are unsure as to whether or not this is the correct product for your unit, please ask. If you seek assistance we will need as much of the following information as possible, if applicable, to help you find the product you are looking for:ModelSpec and/or Type NumberCode and/or Serial NumberYear Our knowledgeable product specialists are always willing to help you verify product fitment. Stay rugged, my friend. – The ROP Shop Staff

7/8″ Shaft, Aluminum Head, Vertical Pump replacement for Pressure Washer with 2800 PSI and 2.3 GPM, includes Keyway

Please review all product information to ensure that this product is compatible with your unit.

A Message to the Customer

The ROP Shop staff constantly strives to provide clear and concise product information. We understand that sometimes it can be difficult to confirm product compatibility. It is your responsibility to confirm this is the correct product you need; therefore, we encourage all customers to fully review the information provided in this listing prior to purchase. Nothing is worse than having to return a product, trust us…we get it. Let’s work together to avoid this! If you are unsure as to whether or not this is the correct product for your unit, please ask. If you seek assistance we will need as much of the following information as possible, if applicable, to help you find the product you are looking for:

• Model
• Spec and/or Type Number
• Code and/or Serial Number
• Year

Our knowledgeable product specialists are always willing to help you verify product fitment. Stay rugged, my friend.

-The ROP Shop Staff

This genuine Briggs and Stratton pressure washer quick-connect spray tips replace old, worn, or lost spray tips for pressure washers up to 4000 PSI. This kit contains four high-pressure pre-defined spray patterns from pin-point to wide fan for precise cleaning and one low pressure cleaning solution spray tip.